10 CFR 429.51 - Commercial pre-rinse spray valves.

Status message

There are 7 Updates appearing in the Federal Register for 10 CFR 429. View below or at eCFR (GPOAccess)
§ 429.51 Commercial pre-rinse spray valves.
(a) Sampling plan for selection of units for testing.
(1) The requirements of § 429.11 are applicable to commercial pre-rinse spray valves; and
(2) For each basic model of commercial pre-rinse spray valves selected for testing, a sample of sufficient size shall be randomly selected and tested to ensure that—
(i) Any represented value of water consumption or other measure of water consumption of a basic model for which consumers would favor lower values shall be greater than or equal to the higher of:
(A) The mean of the sample, where:
Or,
(B) The upper 95 percent confidence limit (UCL) of the true mean divided by 1.10, where:
and
(ii) Any represented value of the water efficiency or other measure of water consumption of a basic model for which consumers would favor higher values shall be less than or equal to the lower of:
(A) The mean of the sample, where:
Or,
(B) The lower 95 percent confidence limit (LCL) of the true mean divided by 0.90, where:
(b) Certification reports.
(1) The requirements of § 429.12 are applicable to commercial pre-rinse spray valves; and
(2) Pursuant to § 429.12(b)(13), a certification report shall include the following public product-specific information: The flow rate in gallons per minute (gpm).
[76 FR 12451, Mar. 7, 2011; 76 FR 24779, May 2, 2011]

Title 10 published on 2014-01-01

The following are only the Rules published in the Federal Register after the published date of Title 10.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

  • 2014-07-11; vol. 79 # 133 - Friday, July 11, 2014
    1. 79 FR 40542 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment: Test Procedures for Residential and Commercial Water Heaters
      GPO FDSys XML | Text
      DEPARTMENT OF ENERGY, Office of Energy Efficiency and Renewable Energy
      Final rule.
      The effective date of this rule is July 13, 2015. Compliance will be mandatory starting one year after the publication in the Federal Register of a mathematical conversion factor to convert from the existing efficiency ratings to efficiency ratings under the test procedure adopted by this final rule, or December 31, 2015, whichever is later. The incorporation by reference of certain publications listed in this rule is approved by the Director of the Federal Register as of July 13, 2015. Other publications referenced were approved on March 23, 2009, and May 16, 2012.
      10 CFR Parts 429, 430, and 431

Title 10 published on 2014-01-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 10 CFR 429 after this date.

  • 2014-07-16; vol. 79 # 136 - Wednesday, July 16, 2014
    1. 79 FR 41456 - Appliance Standards and Rulemaking Federal Advisory Committee: Notice of Membership of the Regional Enforcement Working Group
      GPO FDSys XML | Text
      DEPARTMENT OF ENERGY, Office of Energy Efficiency and Renewable Energy
      Notice of membership.
      An open meeting will be scheduled at a later date.
      10 CFR Part 429