10 CFR 71.93 - Inspection and tests.

§ 71.93 Inspection and tests.
(a) The licensee, certificate holder, and applicant for a CoC shall permit the Commission, at all reasonable times, to inspect the licensed material, packaging, premises, and facilities in which the licensed material or packaging is used, provided, constructed, fabricated, tested, stored, or shipped.
(b) The licensee, certificate holder, and applicant for a CoC shall perform, and permit the Commission to perform, any tests the Commission deems necessary or appropriate for the administration of the regulations in this chapter.
(c) The certificate holder and applicant for a CoC shall notify the NRC, in accordance with § 71.1, days in advance of starting fabrication of the first packaging under a CoC. This paragraph applies to any packaging used for the shipment of licensed material which has either—
(1) A decay heat load in excess of 5 kW; or
(2) A maximum normal operating pressure in excess of 103 kPa (15 lbf/in 2) gauge.
[69 FR 3796, Jan. 26, 2004]

Title 10 published on 2014-01-01

no entries appear in the Federal Register after this date.

Title 10 published on 2014-01-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 10 CFR 71 after this date.

  • 2014-02-11; vol. 79 # 28 - Tuesday, February 11, 2014
    1. 79 FR 8097 - Deliberate Misconduct Rule and Hearings on Challenges to the Immediate Effectiveness of Orders
      GPO FDSys XML | Text
      NUCLEAR REGULATORY COMMISSION
      Proposed rule.
      Submit comments by May 12, 2014. Comments received after this date will be considered if it is practical to do so. However, the NRC is able to ensure consideration only of comments received on or before this date.
      10 CFR Parts 2, 30, 40, 50, 52, 60, 61, 63, 70, 71, 72, 76, 110, and 150