14 CFR Part 25 - AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES

These special conditions are issued for the Airbus Model A330-200 airplane. This airplane as modified by TTF Aerospace LLC will have a novel or unusual design feature associated with the installation of bulk cargo lower deck crew rest compartments. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This document corrects an error that appeared in Docket No. FAA-2012-1215, Special Conditions No. 25-12-482-SC, which was published in the Federal Register on February 19, 2013 (78 FR 11562). The error was an extra number, “12,” in the number of Special Conditions. To avoid confusion, the special conditions published as Docket No. FAA-2012-1215, Special Conditions No. 25-12-482-SC, has been renamed Docket No. FAA-2012-1215, Special Conditions No. 25-482-SC. The heading of this correction also reflects the correct Special Conditions No. 25-482-SC.

These special conditions are issued for the Learjet Model LJ-200-1A10 airplane. This airplane will have novel or unusual design features associated with utilizing go-around performance credit when using an automatic takeoff thrust control system. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Bombardier Aerospace Model BD-500-1A10 and BD-500-1A11 airplanes. These airplanes will have a novel or unusual design feature, specifically sidestick controllers designed to be operated with only one hand. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Embraer S.A., Model EMB-550 airplane. This airplane will have a novel or unusual design feature(s) associated with hydrophobic coatings. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the ATR-GIE Avions de Transport Regional Models ATR42-500 and ATR72-212A airplanes. These airplanes will have novel or unusual design features associated with the architecture and connectivity capabilities of the airplanes' computer systems and networks, which may allow access to or by external computer systems and networks. Connectivity to, or access by, external systems and networks may result in security vulnerabilities to the airplanes' systems. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Boeing Model 757 series airplanes. These airplanes as modified by Flight Structures, Inc. will have novel or unusual design features associated with seats that include non-traditional, large, non-metallic panels that would affect survivability during a post-crash fire event. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Embraer S.A. Models EMB-135 and EMB-145 series airplanes. These airplanes will have a novel or unusual design feature associated with the airplane seats that have non-traditional, large, non-metallic panels that would affect survivability during a post-crash fire event. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Bombardier Model CL-600-2B16 airplanes, including variants CL-601-3A, CL-601-3R and CL-604. This airplane, as modified by Atlantic Aero, Inc., will have a novel or unusual design feature associated with an advanced, enhanced flight vision system (EFVS). The EFVS consists of a head-up display (HUD) system modified to display forward-looking infrared (FLIR) imagery. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Boeing Model 737-800 airplane. This airplane as modified by Lufthansa Technik will have a novel or unusual design feature associated with the installation of large non-structural glass items in the cabin area of an executive interior occupied by passengers and crew. The installation of these items in a passenger compartment, which can be occupied during taxi, takeoff, and landing, is a novel or unusual design feature with respect to the material used. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Gulfstream Aerospace LP, Model Gulfstream G280 airplane. This airplane will have novel or unusual design features associated with connectivity of the passenger service computer systems to the airplane critical systems and data networks. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Gulfstream Aerospace LP, Model Gulfstream G280 airplane. This airplane will have novel or unusual design features associated with the architecture and connectivity capabilities of the airplane's computer systems and networks, which may allow access to or by external computer systems and networks. Connectivity to, or access by, external systems and networks may result in security vulnerabilities to the airplane's systems. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This document corrects an error that appeared in Docket No. NM438, Special Conditions No. 25-423-SC, which were published in the Federal Register on March 28, 2011. The error resulted in the omission of two paragraphs of text in The Special Conditions section.

These special conditions are issued for the Boeing Model 777F airplane. This airplane, as modified by the FedEx Express Corporation, will have a novel or unusual design feature associated with an advanced, enhanced flight vision system (EFVS). The EFVS consists of a head-up display (HUD) system modified to display forward-looking infrared (FLIR) imagery. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Dassault Aviation Model Falcon 7X airplane. This airplane will have a novel or unusual design feature associated with seats with inflatable shoulder straps. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Airbus A350-900 series airplane. These airplanes will have a novel or unusual design feature(s) associated with seats that include non-traditional, large, non-metallic panels that would affect survivability during a post-crash fire event. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Boeing Model 787 series airplanes. These airplanes have a novel or unusual design feature associated with single-place side-facing seats with inflatable lapbelts. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

On March 8, 2011, the FAA published an interim final rule, request for comments (Amendment Nos. 21-94, 25-133, 121-354, 129-50; SFAR 111) on security considerations for lavatory oxygen systems (77 FR 12550). The interim final rule addresses a security vulnerability and is needed so the affected airplanes can continue operating until the non-compliance to airworthiness standards and operating rules is resolved. We sought public comment on the interim final rule even though it became effective upon publication. This action responds to the public comments the FAA received.

These special conditions are issued for the Learjet Model LJ-200-1A10 airplane. This airplane will have novel or unusual design features associated with systems that, directly or as a result of failure or malfunction, affect structural performance. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Learjet Model LJ-200-1A10 airplane. This airplane will have a novel or unusual design feature associated with hydrophobic windshield coatings in lieu of windshield wipers. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Gulfstream Aerospace Corporation (GAC) Model GVI airplane. This airplane will have a novel or unusual design feature associated with the installation of rechargeable lithium batteries and rechargeable lithium-battery systems. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Airbus Model A330-200 airplane. This airplane as modified by TTF Aerospace LLC will have a novel or unusual design feature associated with the installation of bulk cargo lower deck crew rest compartments. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This document corrects an error that appeared in Docket No. FAA-2012-1215, Special Conditions No. 25-12-482-SC, which was published in the Federal Register on February 19, 2013 (78 FR 11562). The error was an extra number, “12,” in the number of Special Conditions. To avoid confusion, the special conditions published as Docket No. FAA-2012-1215, Special Conditions No. 25-12-482-SC, has been renamed Docket No. FAA-2012-1215, Special Conditions No. 25-482-SC. The heading of this correction also reflects the correct Special Conditions No. 25-482-SC.

These special conditions are issued for the Learjet Model LJ-200-1A10 airplane. This airplane will have novel or unusual design features associated with utilizing go-around performance credit when using an automatic takeoff thrust control system. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

The FAA proposes to amend certain airworthiness regulations for transport category airplanes, based on recommendations from the Aviation Rulemaking Advisory Committee (ARAC). Adopting this proposal would eliminate regulatory differences between the airworthiness standards of the FAA and European Aviation Safety Agency (EASA). This proposal would not add new requirements beyond what manufacturers currently meet for EASA certification and would not affect current industry design practices. This proposal would revise the structural test requirements necessary when analysis has not been found reliable; clarify the quality control, inspection, and testing requirements for critical and non-critical castings; add control system requirements that consider structural deflection and vibration loads; expand the fuel tank structural and system requirements regarding emergency landing conditions and landing gear failure conditions; add a requirement that engine mount failure due to overload must not cause hazardous fuel spillage; and revise the inertial forces requirements for cargo compartments by removing the exclusion of compartments located below or forward of all occupants in the airplane.

These special conditions are issued for the Bombardier Aerospace Model BD-500-1A10 and BD-500-1A11 airplanes. These airplanes will have a novel or unusual design feature, specifically sidestick controllers designed to be operated with only one hand. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Embraer S.A., Model EMB-550 airplane. This airplane will have a novel or unusual design feature(s) associated with hydrophobic coatings. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This rulemaking would amend the type certification requirements for chemical oxygen generators installed on transport category airplanes so the generators are secure and not subject to misuse. The intended effect of this action would be to increase the level of security for future transport category airplane designs. This proposal does not directly affect the existing fleet.

This action proposes special conditions for the Embraer S.A. Model EMB-550 airplane. This airplane will have a novel or unusual design feature(s) associated with the interaction of systems and structures. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes special conditions for the Embraer S.A. Model EMB-550 airplane. This airplane will have a novel or unusual design feature(s) associated with the design roll maneuver for electronic flight controls, specifically an electronic flight control system that provides control of the aircraft through pilot inputs to the flight computer. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the ATR-GIE Avions de Transport Regional Models ATR42-500 and ATR72-212A airplanes. These airplanes will have novel or unusual design features associated with the architecture and connectivity capabilities of the airplanes' computer systems and networks, which may allow access to or by external computer systems and networks. Connectivity to, or access by, external systems and networks may result in security vulnerabilities to the airplanes' systems. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes special conditions for the Embraer Model EMB-550 airplane. This airplane will have a novel or unusual design feature associated with the effects of sudden engine stoppage upon the airframe. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Embraer S.A. Models EMB-135 and EMB-145 series airplanes. These airplanes will have a novel or unusual design feature associated with the airplane seats that have non-traditional, large, non-metallic panels that would affect survivability during a post-crash fire event. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes special conditions for the Embraer S.A. Model EMB-550 airplane. This airplane will have a novel or unusual design feature(s) associated with the control surface awareness and mode annunciation of the electronic flight control system. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Bombardier Model CL-600-2B16 airplanes, including variants CL-601-3A, CL-601-3R and CL-604. This airplane, as modified by Atlantic Aero, Inc., will have a novel or unusual design feature associated with an advanced, enhanced flight vision system (EFVS). The EFVS consists of a head-up display (HUD) system modified to display forward-looking infrared (FLIR) imagery. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes special conditions for the Airbus Model A318-112 airplane. This airplane as modified by Fokker Services B.V. will have a novel or unusual design feature associated with a cooktop installation. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

The FAA seeks information from industry developers, manufacturers, and the public related to effective air cleaning technology and sensor technology for the engine and auxiliary power unit bleed air supplied to the passenger cabin and flight deck of a pressurized aircraft. The information obtained will inform the agency of potential research and development plans.

These special conditions are issued for the Boeing Model 737-800 airplane. This airplane as modified by Lufthansa Technik will have a novel or unusual design feature associated with the installation of large non-structural glass items in the cabin area of an executive interior occupied by passengers and crew. The installation of these items in a passenger compartment, which can be occupied during taxi, takeoff, and landing, is a novel or unusual design feature with respect to the material used. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Gulfstream Aerospace LP, Model Gulfstream G280 airplane. This airplane will have novel or unusual design features associated with connectivity of the passenger service computer systems to the airplane critical systems and data networks. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Gulfstream Aerospace LP, Model Gulfstream G280 airplane. This airplane will have novel or unusual design features associated with the architecture and connectivity capabilities of the airplane's computer systems and networks, which may allow access to or by external computer systems and networks. Connectivity to, or access by, external systems and networks may result in security vulnerabilities to the airplane's systems. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This document corrects an error that appeared in Docket No. NM438, Special Conditions No. 25-423-SC, which were published in the Federal Register on March 28, 2011. The error resulted in the omission of two paragraphs of text in The Special Conditions section.

This action proposes special conditions for the Boeing Model 737-800 airplane. This airplane as modified by Lufthansa Technik will have a novel or unusual design feature associated with the installation of large non-structural glass items in the cabin area of an executive interior occupied by passengers and crew. The installation of these items in a passenger compartment, which can be occupied during taxi, takeoff, and landing, is a novel or unusual design feature with respect to the material used. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Boeing Model 777F airplane. This airplane, as modified by the FedEx Express Corporation, will have a novel or unusual design feature associated with an advanced, enhanced flight vision system (EFVS). The EFVS consists of a head-up display (HUD) system modified to display forward-looking infrared (FLIR) imagery. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes special conditions for Airbus A350-900 series airplanes. These airplanes will have novel or unusual design features associated with two separate Crew Rest Compartments: a Flight Crew Rest Compartment (FCRC) intended to be occupied by flight crew members only, and a Cabin Crew Rest Compartment (CCRC) intended to be occupied by cabin crew members. Both types of Crew Rest Compartments (CRC) are installed in the overhead area with access from the main deck. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Dassault Aviation Model Falcon 7X airplane. This airplane will have a novel or unusual design feature associated with seats with inflatable shoulder straps. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Airbus A350-900 series airplane. These airplanes will have a novel or unusual design feature(s) associated with seats that include non-traditional, large, non-metallic panels that would affect survivability during a post-crash fire event. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Boeing Model 787 series airplanes. These airplanes have a novel or unusual design feature associated with single-place side-facing seats with inflatable lapbelts. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

On March 8, 2011, the FAA published an interim final rule, request for comments (Amendment Nos. 21-94, 25-133, 121-354, 129-50; SFAR 111) on security considerations for lavatory oxygen systems (77 FR 12550). The interim final rule addresses a security vulnerability and is needed so the affected airplanes can continue operating until the non-compliance to airworthiness standards and operating rules is resolved. We sought public comment on the interim final rule even though it became effective upon publication. This action responds to the public comments the FAA received.

These special conditions are issued for the Learjet Model LJ-200-1A10 airplane. This airplane will have novel or unusual design features associated with systems that, directly or as a result of failure or malfunction, affect structural performance. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Learjet Model LJ-200-1A10 airplane. This airplane will have a novel or unusual design feature associated with hydrophobic windshield coatings in lieu of windshield wipers. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Gulfstream Aerospace Corporation (GAC) Model GVI airplane. This airplane will have a novel or unusual design feature associated with the installation of rechargeable lithium batteries and rechargeable lithium-battery systems. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.