14 CFR 25.519 - Jacking and tie-down provisions.

Status message

There are 41 Updates appearing in the Federal Register for 14 CFR 25. View below or at eCFR (GPOAccess)
prev | next
§ 25.519 Jacking and tie-down provisions.
(a) General. The airplane must be designed to withstand the limit load conditions resulting from the static ground load conditions of paragraph (b) of this section and, if applicable, paragraph (c) of this section at the most critical combinations of airplane weight and center of gravity. The maximum allowable load at each jack pad must be specified.
(b) Jacking. The airplane must have provisions for jacking and must withstand the following limit loads when the airplane is supported on jacks—
(1) For jacking by the landing gear at the maximum ramp weight of the airplane, the airplane structure must be designed for a vertical load of 1.33 times the vertical static reaction at each jacking point acting singly and in combination with a horizontal load of 0.33 times the vertical static reaction applied in any direction.
(2) For jacking by other airplane structure at maximum approved jacking weight:
(i) The airplane structure must be designed for a vertical load of 1.33 times the vertical reaction at each jacking point acting singly and in combination with a horizontal load of 0.33 times the vertical static reaction applied in any direction.
(ii) The jacking pads and local structure must be designed for a vertical load of 2.0 times the vertical static reaction at each jacking point, acting singly and in combination with a horizontal load of 0.33 times the vertical static reaction applied in any direction.
(c) Tie-down. If tie-down points are provided, the main tie-down points and local structure must withstand the limit loads resulting from a 65-knot horizontal wind from any direction.
[Doc. No. 26129, 59 FR 22102, Apr. 28, 1994]

Title 14 published on 2014-01-01

The following are only the Rules published in the Federal Register after the published date of Title 14.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

  • 2014-08-07; vol. 79 # 152 - Thursday, August 7, 2014
    1. 79 FR 46167 - Special Conditions: Airbus Model A350-900 Series Airplane; Tire Failure—Debris Penetration or Rupture of Fuel-Tank Structure
      GPO FDSys XML | Text
      DEPARTMENT OF TRANSPORTATION, Federal Aviation Administration
      Final special conditions.
      Effective Date: September 8, 2014.
      14 CFR Part 25

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code

Title 14 published on 2014-01-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 14 CFR 25 after this date.

  • 2014-08-07; vol. 79 # 152 - Thursday, August 7, 2014
    1. 79 FR 46167 - Special Conditions: Airbus Model A350-900 Series Airplane; Tire Failure—Debris Penetration or Rupture of Fuel-Tank Structure
      GPO FDSys XML | Text
      DEPARTMENT OF TRANSPORTATION, Federal Aviation Administration
      Final special conditions.
      Effective Date: September 8, 2014.
      14 CFR Part 25