14 CFR 29.1015 - Oil tank tests.

§ 29.1015 Oil tank tests.
Each oil tank must be designed and installed so that—
(a) It can withstand, without failure, any vibration, inertia, and fluid loads to which it may be subjected in operation; and
(b) It meets the requirements of § 29.965, except that instead of the pressure specified in § 29.965(b)
(1) For pressurized tanks used with a turbine engine, the test pressure may not be less than 5 p.s.i. plus the maximum operating pressure of the tank; and
(2) For all other tanks, the test pressure may not be less than 5 p.s.i.
[Doc. No. 5084, 29 FR 16150, Dec. 3, 1964, as amended by Amdt. 29-10, 39 FR 35462, Oct. 1, 1974]

Title 14 published on 2014-01-01

no entries appear in the Federal Register after this date.

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code

Title 14 published on 2014-01-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 14 CFR 29 after this date.

  • 2014-07-31; vol. 79 # 147 - Thursday, July 31, 2014
    1. 79 FR 44320 - Interest in Restructure of Rotorcraft Airworthiness Standards
      GPO FDSys XML | Text
      DEPARTMENT OF TRANSPORTATION, Federal Aviation Administration
      Notice of Disposition of Comments.
      The docket is terminated as of July 31, 2014.
      14 CFR Parts 27 and 29