14 CFR 29.753 - Main float design.

§ 29.753 Main float design.
(a) Bag floats. Each bag float must be designed to withstand—
(1) The maximum pressure differential that might be developed at the maximum altitude for which certification with that float is requested; and
(2) The vertical loads prescribed in § 29.521(a), distributed along the length of the bag over three-quarters of its projected area.
(b) Rigid floats. Each rigid float must be able to withstand the vertical, horizontal, and side loads prescribed in § 29.521. An appropriate load distribution under critical conditions must be used.

Title 14 published on 2014-01-01

no entries appear in the Federal Register after this date.

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code