14 CFR 33.96 - Engine tests in auxiliary power unit (APU) mode.

These final special conditions are issued for the General Electric Aviation (GE) CT7-2E1 engine model. This engine model will have a novel or unusual design feature, which is a combination of two existing ratings into a new rating called “flat 30-second and 2-minute OEI” rating. This rating is intended for the continuation of flight of a multi-engine rotorcraft after one engine becomes inoperative. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These final special conditions contain the additional safety standards the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

The FAA is correcting a technical amendment published on July 5, 2012 (77 FR 39623). In that technical amendment, the FAA clarified aircraft engine vibration test requirements in the airworthiness standards. The technical amendment was in response to inquiries from applicants requesting FAA engine type certifications and aftermarket certifications, such as supplemental type certificates, parts manufacturing approvals, and repairs. We revised the regulation to clarify that engine surveys require an engine test. Representatives of industry suggested that our technical amendment was in fact, a substantive change in the regulation, not a clarification. The FAA is correcting our prior action in response to that industry claim. This document amends the FAA's regulations to reverse the changes to § 33.83(a) amendment 33-33 and restore § 33.83(a) to its previous amendment 33-17.

This amendment clarifies aircraft engine vibration test requirements in the airworthiness standards. The clarification is in response to inquiries from applicants requesting FAA engine type certifications and aftermarket certifications, such as supplemental type certificates, parts manufacturing approvals, and repairs. We are revising the regulations to clarify that “engine surveys” require an engine test. The change is not substantive in nature, and will not impose any additional burden on any person.

This amendment corrects a number of errors in the airworthiness standards for aircraft engine endurance tests. None of the changes are substantive in nature, and none will impose any additional burden on any person.

These final special conditions are issued for the General Electric Aviation (GE) CT7-2E1 engine model. This engine model will have a novel or unusual design feature, which is a combination of two existing ratings into a new rating called “flat 30-second and 2-minute OEI” rating. This rating is intended for the continuation of flight of a multi-engine rotorcraft after one engine becomes inoperative. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These final special conditions contain the additional safety standards the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes special conditions for the Turbomeca Ardiden 3K model engines. This engine model will have a novel or unusual design feature which is a 30-minute all engines operating (AEO) power rating for hovering at increased power (HIP). This rating is primarily intended for high-power hovering operations that are normal mission functions. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the FAA considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

The FAA is correcting a technical amendment published on July 5, 2012 (77 FR 39623). In that technical amendment, the FAA clarified aircraft engine vibration test requirements in the airworthiness standards. The technical amendment was in response to inquiries from applicants requesting FAA engine type certifications and aftermarket certifications, such as supplemental type certificates, parts manufacturing approvals, and repairs. We revised the regulation to clarify that engine surveys require an engine test. Representatives of industry suggested that our technical amendment was in fact, a substantive change in the regulation, not a clarification. The FAA is correcting our prior action in response to that industry claim. This document amends the FAA's regulations to reverse the changes to § 33.83(a) amendment 33-33 and restore § 33.83(a) to its previous amendment 33-17.

This action proposes special conditions for the General Electric CT7-2E1 engine model. This engine model will have a novel or unusual design feature which is a combination of two existing ratings into a new rating called “flat 30-second and 2-minute OEI” rating. This rating is intended for the continuation of flight of a multi-engine rotorcraft after one engine becomes inoperative. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This amendment clarifies aircraft engine vibration test requirements in the airworthiness standards. The clarification is in response to inquiries from applicants requesting FAA engine type certifications and aftermarket certifications, such as supplemental type certificates, parts manufacturing approvals, and repairs. We are revising the regulations to clarify that “engine surveys” require an engine test. The change is not substantive in nature, and will not impose any additional burden on any person.

This amendment corrects a number of errors in the airworthiness standards for aircraft engine endurance tests. None of the changes are substantive in nature, and none will impose any additional burden on any person.