16 CFR 1209, Subpart A - The Standard
prev | next
- § 1209.1 — Scope and application.
- § 1209.2 — Definitions and measurements.
- § 1209.3 — General requirements.
- § 1209.4 — Test procedures for determining settled density.
- § 1209.5 — Test procedures for corrosiveness.
- § 1209.6 — Test procedures for critical radiant flux.
- § 1209.7 — Test procedures for smoldering combustion.
- § 1209.8 — Procedure for calibration of radiation instrumentation.
- § 1209.9 — Labeling requirement.
- § 1209.10 — Certification and enforcement.
- § 1209.11 — Effective date.
- Figure 1 to Subpart A of Part 1209 - Partial Insulation Preparation Apparatus
- Figure 2 to Subpart A of Part 1209 - Cyclone Receiver Weldment
- Figure 3 to Subpart A of Part 1209 - Flooring Radiant Tester Schematic Side Elevation
- Figure 4 to Subpart A of Part 1209 - Flooring Radiant Panel Tester Schematic Low Flux End, Elevation
- Figure 5 to Subpart A of Part 1209 - Zero Reference Point Related to Detecting Plane
- Figure 6 to Subpart A of Part 1209 - Dummy Specimen in Specimen Holder
- Figure 7 to Subpart A of Part 1209 - Specimen Tray
- Figure 8 to Subpart A of Part 1209 - Standard Radiant Heat Energy Flux Profile
- Figure 9 to Subpart A of Part 1209 - Flux Profile Data Log Format
- Figure 10 to Subpart A of Part 1209 - Insulation Radiant Panel Test Data Log Format
Title 16 published on 2013-01-01
no entries appear in the Federal Register after this date.
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
- Figure 1 to Subpart A of Part 1209 - Partial Insulation Preparation Apparatus
- Figure 2 to Subpart A of Part 1209 - Cyclone Receiver Weldment
- Figure 3 to Subpart A of Part 1209 - Flooring Radiant Tester Schematic Side Elevation
- Figure 4 to Subpart A of Part 1209 - Flooring Radiant Panel Tester Schematic Low Flux End, Elevation
- Figure 5 to Subpart A of Part 1209 - Zero Reference Point Related to Detecting Plane
- Figure 6 to Subpart A of Part 1209 - Dummy Specimen in Specimen Holder
- Figure 7 to Subpart A of Part 1209 - Specimen Tray
- Figure 8 to Subpart A of Part 1209 - Standard Radiant Heat Energy Flux Profile
- Figure 9 to Subpart A of Part 1209 - Flux Profile Data Log Format
- Figure 10 to Subpart A of Part 1209 - Insulation Radiant Panel Test Data Log Format
