16 CFR Part 1213 - SAFETY STANDARD FOR ENTRAPMENT HAZARDS IN BUNK BEDS
- § 1213.1 — Scope, application, and effective date.
- § 1213.2 — Definitions.
- § 1213.3 — Requirements.
- § 1213.4 — Test methods.
- § 1213.5 — Marking and labeling.
- § 1213.6 — Instructions.
- § 1213.7 — Findings.
- Figure 1 to Part 1213 - Wedge Block for Tests in § 1213.4(a), (b) and (c)
- Figure 2 to Part 1213 - Test Template for Neck Entrapment
- Figure 3 to Part 1213 - Motion of Test Template Arrested by Simultaneous Contact With Both Sides of “A” Section and Boundaries of Opening
- Figure 4 to Part 1213 - Neck Portion of “B” Section of Template Enters Completely Into Opening
- Appendix to Part 1213 - Findings Under the Consumer Product Safety Act
Authority:
Source:
64 FR 71899, Dec. 22, 1999, unless otherwise noted.
Title 16 published on 2013-01-01
no entries appear in the Federal Register after this date.
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
- Figure 1 to Part 1213 - Wedge Block for Tests in § 1213.4(a), (b) and (c)
- Figure 2 to Part 1213 - Test Template for Neck Entrapment
- Figure 3 to Part 1213 - Motion of Test Template Arrested by Simultaneous Contact With Both Sides of “A” Section and Boundaries of Opening
- Figure 4 to Part 1213 - Neck Portion of “B” Section of Template Enters Completely Into Opening
- Appendix to Part 1213 - Findings Under the Consumer Product Safety Act
