21 CFR 801.60 - Principal display panel.

Status message

There is 1 rule appearing in the Federal Register for 21 CFR 801. View below or at eCFR (GPOAccess)
prev | next
§ 801.60 Principal display panel.
The term principal display panel, as it applies to over-the-counter devices in package form and as used in this part, means the part of a label that is most likely to be displayed, presented, shown, or examined under customary conditions of display for retail sale. The principal display panel shall be large enough to accommodate all the mandatory label information required to be placed thereon by this part with clarity and conspicuousness and without obscuring designs, vignettes, or crowding. Where packages bear alternate principal display panels, information required to be placed on the principal display panel shall be duplicated on each principal display panel. For the purpose of obtaining uniform type size in declaring the quantity of contents for all packages of substantially the same size, the term area of the principal display panel means the area of the side or surface that bears the principal display panel, which area shall be:
(a) In the case of a rectangular package where one entire side properly can be considered to be the principal display panel side, the product of the height times the width of that side;
(b) In the case of a cylindrical or nearly cylindrical container, 40 percent of the product of the height of the container times the circumference; and
(c) In the case of any other shape of container, 40 percent of the total surface of the container: Provided, however, That where such container presents an obvious “principal display panel” such as the top of a triangular or circular package, the area shall consist of the entire top surface.
In determining the area of the principal display panel, exclude tops, bottoms, flanges at the tops and bottoms of cans, and shoulders and necks of bottles or jars. In the case of cylindrical or nearly cylindrical containers, information required by this part to appear on the principal display panel shall appear within that 40 percent of the circumference which is most likely to be displayed, presented, shown, or examined under customary conditions of display for retail sale.

Title 21 published on 2013-04-01

The following are only the Rules published in the Federal Register after the published date of Title 21.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

  • 2013-09-24; vol. 78 # 185 - Tuesday, September 24, 2013
    1. 78 FR 58786 - Unique Device Identification System
      GPO FDSys XML | Text
      DEPARTMENT OF HEALTH AND HUMAN SERVICES, Food and Drug Administration
      Final rule.
      This rule is effective December 23, 2013, except §§ 801.55, 830.10, 830.100, 830.110, 830.120, and 830.130 are effective October 24, 2013. The incorporation by reference of § 830.20 listed in the rule is approved by the Director of the Office of the Federal Register as of December 23, 2013. The incorporation by reference of §§ 830.10 and 830.100 listed in the rule is approved by the Director of the Office of the Federal Register as of October 24, 2013. Certain provisions have later compliance dates as discussed in section VII. B. “Compliance Dates.”
      21 CFR Parts 16, 801, 803, 806, 810, 814, 820, 821, 822, and 830

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code

Title 21 published on 2013-04-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 21 CFR 801 after this date.

  • 2013-09-24; vol. 78 # 185 - Tuesday, September 24, 2013
    1. 78 FR 58786 - Unique Device Identification System
      GPO FDSys XML | Text
      DEPARTMENT OF HEALTH AND HUMAN SERVICES, Food and Drug Administration
      Final rule.
      This rule is effective December 23, 2013, except §§ 801.55, 830.10, 830.100, 830.110, 830.120, and 830.130 are effective October 24, 2013. The incorporation by reference of § 830.20 listed in the rule is approved by the Director of the Office of the Federal Register as of December 23, 2013. The incorporation by reference of §§ 830.10 and 830.100 listed in the rule is approved by the Director of the Office of the Federal Register as of October 24, 2013. Certain provisions have later compliance dates as discussed in section VII. B. “Compliance Dates.”
      21 CFR Parts 16, 801, 803, 806, 810, 814, 820, 821, 822, and 830