29 CFR 1910.269, Appendix A to

Status message

There are 5 Updates appearing in the Federal Register for 29 CFR 1910. View below or at eCFR (GPOAccess)
prev | next
Appendix A to § 1910.269—Flow Charts
This appendix presents information, in the form of flow charts, that illustrates the scope and application of § 1910.269. This appendix addresses the interface between § 1910.269 and subpart S of this part (Electrical), between § 1910.269 and § 1910.146 of this part (Permit-required confined spaces), and between § 1910.269 and § 1910.147 of this part (The control of hazardous energy (lockout/tagout)). These flow charts provide guidance for employers trying to implement the requirements of § 1910.269 in combination with other General Industry Standards contained in part 1910.
Appendix A-1 to § 1910.269—Application of § 1910.269 and Subpart S of This Part to Electrical Installations
Appendix A-2 to § 1910.269—Application of § 1910.269 and subpart S of This Part to Electrical Safety-Related Work Practices
Table 1—Electrical Safety-Related Work Practices in § 1910.269
Compliance with subpart S is considered as compliance with § 1910.269 1 Paragraphs that apply regardless of compliance with subpart S
1 If the electrical installation meets the requirements of §§ 1910.303 through 1910.308 of this part, then the electrical installation and any associated electrical safety-related work practices conforming to §§ 1910.332 through 1910.335 of this part are considered to comply with these provisions of § 1910.269 of this part.
2 These provisions include electrical safety requirements that must be met regardless of compliance with subpart S of this part.
(d), electric shock hazards only (a)(2) 2 and (a)(3) 2.
(h)(3) (b) 2.
(i)(2) (c) 2.
(k) (d), other than electric shock hazards.
(l)(1) through (l)(4), (l)(6)(i), and (l)(8) through (l)(10) (e).
(m) (f).
(p)(4) (g).
(s)(2) (h)(1) and (h)(2).
(u)(1) and (u)(3) through (u)(5) (i)(3) 2 and (i)(4) 2.
(v)(3) through (v)(5) (j) 2.
(w)(1) and (w)(7) (l)(5) 2, (l)(6)(ii) 2, (l)(6)(iii) 2, and (l)(7) 2.
(n) 2.
(o) 2.
(p)(1) through (p)(3).
(q) 2.
(r) 2.
(s)(1).
(t) 2.
(u)(2) 2 and (u)(6) 2.
(v)(1), (v)(2) 2, and (v)(6) through (v)(12).
(w)(2) through (w)(6) 2, (w)(8), and (w)(9) 2.

Title 29 published on 2013-07-01

The following are only the Rules published in the Federal Register after the published date of Title 29.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

  • 2014-04-18; vol. 79 # 75 - Friday, April 18, 2014
    1. 79 FR 21848 - Record Requirements in the Mechanical Power Presses Standard
      GPO FDSys XML | Text
      DEPARTMENT OF LABOR, Occupational Safety and Health Administration
      Final rule; confirmation of effective date.
      The direct final rule published on November 20, 2013 (78 FR 69543), became effective as a final rule on February 18, 2014. For the purposes of judicial review, OSHA considers April 18, 2014, the date of issuance of the final rule.
      29 CFR Part 1910

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code
U.S. Code: Title 5 - GOVERNMENT ORGANIZATION AND EMPLOYEES
U.S. Code: Title 20 - EDUCATION
U.S. Code: Title 29 - LABOR
U.S. Code: Title 31 - MONEY AND FINANCE
U.S. Code: Title 33 - NAVIGATION AND NAVIGABLE WATERS
U.S. Code: Title 40 - PUBLIC BUILDINGS, PROPERTY, AND WORKS
U.S. Code: Title 49 - TRANSPORTATION
Statutes at Large
Public Laws

Title 29 published on 2013-07-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 29 CFR 1910 after this date.

  • 2014-04-18; vol. 79 # 75 - Friday, April 18, 2014
    1. 79 FR 21848 - Record Requirements in the Mechanical Power Presses Standard
      GPO FDSys XML | Text
      DEPARTMENT OF LABOR, Occupational Safety and Health Administration
      Final rule; confirmation of effective date.
      The direct final rule published on November 20, 2013 (78 FR 69543), became effective as a final rule on February 18, 2014. For the purposes of judicial review, OSHA considers April 18, 2014, the date of issuance of the final rule.
      29 CFR Part 1910