29 CFR 1910, Subpart L, Appendix B to Subpart L of Part 1910 - National Consensus Standards

This document updates a non-mandatory appendix in OSHA's Occupational Exposure to Hazardous Chemicals in Laboratories Standard. The non-mandatory appendix is being updated to include the contents of the latest National Academy of Sciences publication entitled, “Prudent Practices in the Laboratory: Handling and Management of Chemical Hazards,” 2011 edition. All revisions being made are minor and non-substantive.

OSHA is confirming the effective date of its direct final rule that revises the Head Protection standards for general industry, shipyard employment, marine terminals, longshoring, and construction by updating the reference to a standard published by a standards-developing organization, the American National Standards Institute. In the June 22, 2012, direct final rule, OSHA stated that it would withdraw the companion proposed rule and confirm the effective date of the direct final rule if the Agency received no significant adverse comments. OSHA did not receive significant adverse comments on the direct final rule. Therefore, OSHA is confirming that the direct final rule became effective on September 20, 2012.

The Occupational Safety and Health Administration (OSHA) is announcing that the Office of Management and Budget (OMB) approved the revised information collection requirements contained in the Hazard Communication Standard (HCS) (29 CFR parts 1910, 1915, and 1926) under the Paperwork Reduction Act of 1995 (PRA-95). The OMB control number is 1218-0072.

OSHA is correcting the medical evaluation questionnaire in Appendix C of its Respiratory Protection standard by removing the term “fits” in a question. OSHA also is correcting its Mechanical Power Presses standard for general industry by restoring requirements that were removed inadvertently from the regulatory text. Finally, the Agency is correcting a cross reference made in two paragraphs in Appendix A to subpart L of its scaffold standards for construction.

This document updates a non-mandatory appendix in OSHA's Occupational Exposure to Hazardous Chemicals in Laboratories Standard. The non-mandatory appendix is being updated to include the contents of the latest National Academy of Sciences publication entitled, “Prudent Practices in the Laboratory: Handling and Management of Chemical Hazards,” 2011 edition. All revisions being made are minor and non-substantive.

OSHA is initiating a regulatory review of its existing safety and health standards in response to the President's Executive Order 13563, “Improving Regulations and Regulatory Review” (76 FR 38210). The Agency conducted similar regulatory reviews of its existing standards previously as “standards improvement projects.” OSHA is issuing this request for information to initiate another of these regulatory reviews, and naming this review the Standards Improvement Project—Phase IV (SIP-IV). The purpose of SIP-IV is to improve and streamline OSHA standards by removing or revising requirements that are confusing or outdated, or that duplicate, or are inconsistent with, other standards. The purpose of the regulatory review is to reduce regulatory burden while maintaining or enhancing employees' safety and health. SIP-IV will focus primarily on OSHA's construction standards. The purpose of this notice is to invite the public, including employers, employees, and employee representatives involved in the construction industry, to submit recommendations for revisions to existing construction standards, including the rationale for these recommendations. OSHA will review this information to determine the need for, and the content of, any subsequent SIP-IV rulemaking.

The Occupational Safety and Health Administration (OSHA) is announcing that the Office of Management and Budget (OMB) approved the revised information collection requirements contained in the Hazard Communication Standard (HCS) (29 CFR parts 1910, 1915, and 1926) under the Paperwork Reduction Act of 1995 (PRA-95). The OMB control number is 1218-0072.

OSHA is correcting the medical evaluation questionnaire in Appendix C of its Respiratory Protection standard by removing the term “fits” in a question. OSHA also is correcting its Mechanical Power Presses standard for general industry by restoring requirements that were removed inadvertently from the regulatory text. Finally, the Agency is correcting a cross reference made in two paragraphs in Appendix A to subpart L of its scaffold standards for construction.