30 CFR Chapter VII, Subchapter P - PROTECTION OF EMPLOYEES

Status message

There are 14 Updates appearing in the Federal Register for Title 30. View below or at eCFR (GPOAccess)

Title 30 published on 2014-07-01

The following are only the Rules published in the Federal Register after the published date of Title 30.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

  • 2015-01-15; vol. 80 # 10 - Thursday, January 15, 2015
    1. 80 FR 2188 - Proximity Detection Systems for Continuous Mining Machines in Underground Coal Mines
      GPO FDSys XML | Text
      DEPARTMENT OF LABOR, Mine Safety and Health Administration
      Final rule.
      Effective date: The final rule is effective March 16, 2015. Compliance dates: • Continuous mining machines manufactured after March 16, 2015 must meet requirements no later than November 16, 2015. • Continuous mining machines manufactured and equipped with a proximity detection system on or before March 16, 2015 must meet requirements no later than September 16, 2016. • Continuous mining machines manufactured and not equipped with a proximity detection system on or before March 16, 2015 must meet requirements no later than March 16, 2018.
      30 CFR Part 75

Title 30 published on 2014-07-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to Title 30 after this date.

  • 2015-01-15; vol. 80 # 10 - Thursday, January 15, 2015
    1. 80 FR 2188 - Proximity Detection Systems for Continuous Mining Machines in Underground Coal Mines
      GPO FDSys XML | Text
      DEPARTMENT OF LABOR, Mine Safety and Health Administration
      Final rule.
      Effective date: The final rule is effective March 16, 2015. Compliance dates: • Continuous mining machines manufactured after March 16, 2015 must meet requirements no later than November 16, 2015. • Continuous mining machines manufactured and equipped with a proximity detection system on or before March 16, 2015 must meet requirements no later than September 16, 2016. • Continuous mining machines manufactured and not equipped with a proximity detection system on or before March 16, 2015 must meet requirements no later than March 16, 2018.
      30 CFR Part 75