33 CFR 155, Appendix A to Part 155 - Specifications for Shore Connection
prev | next
Pt. 155, App. A
Appendix A to Part 155—Specifications for Shore Connection
| [See §§ 340, 350, 370 and 380 of this part] | ||
| Item | Description | Dimension |
|---|---|---|
| 1 | Outside diameter | 215 mm. (8 in.). |
| 2 | Inside diameter | According to pipe outside diameter. |
| 3 | Bolt circle diameter | 183 mm. (7 3/16 in.). |
| 4 | Slots in flange | 6 holes 22 mm. (7/8 in.) in diameter shall be equidistantly placed on a bolt circle of the above diameter, slotted to the flange periphery. The slot width is to be 22 mm. (7/8 in.). |
| 5 | Flange thickness | 20 mm. (3/4 in.). |
| 6 | Bolts and nuts | 6, each of 20 mm. (3/4 in.) in diameter and of suitable length. |
| The flange must be of steel having a flat face, with a gasket of oilproof material, and must be suitable for a service pressure of 6 kg./cm.2 (85 p.s.i.). | ||
| The steel materials used must meet the material specifications of standard B16.5, Steel Pipe Flanges and Flanged Fittings of the American National Standards Institute. (See § 154.106 of this chapter.) | ||
[CGD 75-124, 45 FR 7176, Jan. 31, 1980]
Title 33 published on 2012-07-01
The following are only the Rules published in the Federal Register after the published date of Title 33.
For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.
Title 33 published on 2012-07-01
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 33 CFR 155 after this date.
