40 CFR 417.155 - Standards of performance for new sources.

§ 417.155 Standards of performance for new sources.
The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
(a) For normal operation of spray drying towers as defined above, the following values pertain:
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—
1 Within the range 6.0 to 9.0.
Metric units (kilograms per 1,000 kg of anhydrous product)
BOD5 0.02 0.01
COD 0.08 .04
TSS 0.04 .02
Surfactants 0.04 .02
Oil and grease 0.01 .005
pH (1) (1)
English units (pounds per 1,000 lb of anhydrous product)
BOD5 0.02 0.01
COD 0.08 .04
TSS 0.04 .02
Surfactants 0.04 .02
Oil and grease 0.01 .005
pH (1) (1)
(b) For air quality restricted operation of a spray drying tower, but only when a high rate of wet scrubbing is in operation which produces more waste water than can be recycled to process, the following values pertain:
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed—
1 Within the range 6.0 to 9.0.
Metric units (kilograms per 1,000 kg of anhydrous product)
BOD5 0.12 0.06
COD 0.50 .25
TSS 0.14 .07
Surfactants 0.20 .10
Oil and grease 0.04 .02
pH (1) (1)
English units (pounds per 1,000 lb of anhydrous product)
BOD5 0.12 0.06
COD 0.50 .25
TSS 0.14 .07
Surfactants 0.20 .10
Oil and grease 0.04 .02
pH (1) (1)
(c) For fast turnaround operation of a spray tower, the following values pertain: The maximum for any one day when the number of turnarounds exceeds six in any particular thirty consecutive day period shall be the sum of the appropriate value below and that from paragraph (a) or (b) of this section; and the average of daily values for thirty consecutive days shall be the value shown below multiplied by the number of turnarounds in excess of six and prorated to thirty days plus the appropriate value from paragraph (a) or (b) of this section.
Effluent characteristic Effluent limitations (maximum for any 1 day)
1 Within the range 6.0 to 9.0.
Metric units (kilograms per 1,000 kg of anhydrous product)
BOD5 0.02
COD 0.07
TSS 0.02
Surfactants 0.02
Oil and grease 0.005
pH (1)
English units (pounds per 1,000 lb of anhydrous product)
BOD5 0.02
COD 0.07
TSS 0.02
Surfactants 0.02
Oil and grease 0.005
pH (1)

Title 40 published on 2014-07-01

no entries appear in the Federal Register after this date.

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code
Statutes at Large