40 CFR 428.56 - Pretreatment standards for new sources.

prev | next
§ 428.56 Pretreatment standards for new sources.
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403, in addition to the limitations set forth in paragraphs (a) and (b) of this section.
(a) The following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart:
Pollutant or pollutant property Pretreatment standard
pH No limitation.
TSS Do.
Oil and grease 100 mg/l daily maximum.
(b) The following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to lead-sheathed hose production, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart, in addition to the limitations set forth by § 428.56(a):
Pollutant or pollutant property Pretreatment standards
Maximum for any 1 day Average of daily values for thirty consecutive days shall not exceed—
Metric units (kg/kkg of raw material)
Lead 0.0017 0.0007
English units (lb/1,000 lb of raw material)
Lead 0.0017 0.0007
[40 FR 2336, Jan. 10, 1975, as amended at 60 FR 33963, June 29, 1995]

Title 40 published on 2014-07-01

no entries appear in the Federal Register after this date.

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code
Statutes at Large