Table 4 of Subpart AAAA to Part 60—Requirements for Continuous Emission Monitoring Systems (CEMS)
For the following pollutants
Use the following span values for your CEMS
Use the following performance specifications in appendix B of this part for your CEMS
If needed to meet minimumdata requirements, use thefollowing alternate methodsin appendix A of this partto collect data
a Class I units mean small municipal waste combustion units subject to this subpart that are located at municipal waste combustion plants with an aggregate plant combustion capacity more than 250 tons per day of municipal solid waste. See § 60.1465 for definitions.
100 percent opacity
2. Nitrogen Oxides (Class I units only) a
Control device outlet: 125 percent of the maximum expected hourly potential nitrogen oxides emissions of the municipal waste combustion unit
3. Sulfur Dioxide
Inlet to control device: 125 percent of the maximum expected sulfur dioxide emissions of the municipal waste combustion unit. Control device outlet: 50 percent of the maximum expected hourly potential sulfur dioxide emissions of the municipal waste combustion unit
4. Carbon Monoxide
125 percent of the maximum expected hourly potential carbon with monoxide emissions of the municipal waste combustion unit
Method 10 alternative interference trap.
5. Oxygen or Carbon Dioxide
25 percent oxygen or 25 percent carbon dioxide
Method 3A or 3B.
Title 40 published on 2012-07-01
The following are only the Rules published in the Federal Register after the published date of Title 40.
For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.