Table 3 to Subpart BBBB of Part 60—Model Rule—Class I Nitrogen Oxides Emission Limits for Existing Small Municipal Waste Combustion Unitsa,b,c
Municipal waste combustion technology
Limits for class I municipal waste combustion units
a Class I units mean small municipal waste combustion units subject to this subpart that are located at municipal waste combustion plants with an aggregate plant combustion capacity greater than 250 tons per day of municipal solid waste. See § 60.1940 for definitions.
b Nitrogen oxides limits are measured at 7 percent oxygen.
c All limits are 24-hour daily block arithmetic average concentration. Compliance is determined for Class I units by continuous emission monitoring systems.
1. Mass burn waterwall
200 parts per million by dry volume.
2. Mass burn rotary waterwall
170 parts per million by dry volume.
3. Refuse-derived fuel
250 parts per million by dry volume.
4. Fluidized bed
220 parts per million by dry volume.
5. Mass burn refractory
350 parts per million by dry volume.
6. Modular excess air
190 parts per million by dry volume.
7. Modular starved air
380 parts per million by dry volume.
Title 40 published on 2012-07-01
The following are only the Rules published in the Federal Register after the published date of Title 40.
For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.