What are my inspection and monitoring requirements for separators?
(a) If you use a floating roof according to § 63.7910(b)(1), you must meet requirements in paragraphs (a)(1) and (2) of this section.
(1) Measure the seal gaps at least annually according to the requirements in § 63.1047(b)(1).
(2) Visually inspect the floating roof at least annually according to the requirements in § 63.1047(b)(2).
(b) If you use a cover vented to a control device according to § 63.7910(b)(1) or (2), you must meet requirements in paragraphs (b)(1) and (2) of this section.
(1) You must visually inspect the cover and its closure devices for defects according to the requirements in § 63.1047(c).
(2) You must monitor and inspect the closed vent system and control device according to the requirements in § 63.7927 that apply to you.
(c) If you use a pressurized separator that operates as a closed system according to § 63.7910(b)(3), you must visually inspect each pressurized separator and closure devices for defects at least annually to ensure they are operating according to the design requirements in § 63.1045(b).
Title 40 published on 2012-07-01
The following are only the Rules published in the Federal Register after the published date of Title 40.
For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.