Table 3 to Subpart VVVVVV of Part 63—Emission Limits and Compliance Requirements for Continuous Process Vents
As required in § 63.11496, you must comply with the requirements for continuous process vents as shown in the following table.
For * * *
You must * * *
Except * * *
1. Each continuous process vent with a TRE ≤1.0
a. Reduce emissions of total organic HAP by ≥95 percent by weight (≥85 percent by weight for periods of startup or shutdown) or to ≤20 ppmv by routing emissions through a closed vent system to any combination of control devices (except a flare) in accordance with the requirements of § 63.982(c)(2) and the requirements referenced therein; or
i. Compliance may be based on either total organic HAP or TOC; andii. As specified in § 63.11496(g).
b. Reduce emissions of total organic by HAP by routing all emissions through a closed-vent system to a flare (except that a flare may not be used to control halogenated vent streams) in accordance with the requirements of § 63.982(b) and the requirements referenced therein; or
i. Not applicable.
c. Comply with the alternative standard specified in § 63.2505 and the requirements referenced therein