40 CFR 98.294 - Monitoring and QA/QC requirements.

Status message

There are 4 Updates appearing in the Federal Register for 40 CFR 98. View below or at eCFR (GPOAccess)
§ 98.294 Monitoring and QA/QC requirements.
Section 98.293 provides three different procedures for emission calculations. The appropriate paragraphs (a) through (c) of this section should be used for the procedure chosen.
(a) If you determine your emissions using § 98.293(b)(2) (Equation CC-1 of this subpart) you must:
(1) Determine the monthly inorganic carbon content of the trona from a weekly composite analysis for each soda ash manufacturing line, using a modified version of ASTM E359-00 (Reapproved 2005)e1, Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) (incorporated by reference, see § 98.7). ASTM E359-00(Reapproved 2005) e1 is designed to measure the total alkalinity in soda ash not in trona. The modified method referred to above adjusts the regular ASTM method to express the results in terms of trona. Although ASTM E359-00 (Reapproved 2005) e1 uses manual titration, suitable autotitrators may also be used for this determination.
(2) Measure the mass of trona input produced by each soda ash manufacturing line on a monthly basis using belt scales or methods used for accounting purposes.
(3) Document the procedures used to ensure the accuracy of the monthly measurements of trona consumed.
(b) If you calculate CO2 process emissions based on soda ash production (§ 98.293(b)(2) Equation CC-2 of this subpart), you must:
(1) Determine the inorganic carbon content of the soda ash (i.e., soda ash purity) using ASTM E359-00 (Reapproved 2005) e1 Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) (incorporated by reference, see § 98.7). Although ASTM E359-00 (Reapproved 2005) e1 uses manual titration, suitable autotitrators may also be used for this determination.
(2) Measure the mass of soda ash produced by each soda ash manufacturing line on a monthly basis using belt scales, by weighing the soda ash at the truck or rail loadout points of your facility, or methods used for accounting purposes.
(3) Document the procedures used to ensure the accuracy of the monthly measurements of soda ash produced.
(c) If you calculate CO2 emissions using the site-specific emission factor method in § 98.293(b)(3), you must:
(1) Conduct an annual performance test that is based on representative performance (i.e., performance based on normal operating conditions) of the affected process.
(2) Sample the stack gas and conduct three emissions test runs of 1 hour each.
(3) Conduct the stack test using EPA Method 3A at 40 CFR part 60, appendix A-2 to measure the CO2 concentration, Method 2, 2A, 2C, 2D, or 2F at 40 CFR part 60, appendix A-1 or Method 26 at 40 CFR part 60, appendix A-2 to determine the stack gas volumetric flow rate. All QA/QC procedures specified in the reference test methods and any associated performance specifications apply. For each test, the facility must prepare an emission factor determination report that must include the items in paragraphs (c)(3)(i) through (c)(3)(iii) of this section.
(i) Analysis of samples, determination of emissions, and raw data.
(ii) All information and data used to derive the emissions factor(s).
(iii) You must determine the average process vent flow rate from the mine water stripper/evaporater during each test and document how it was determined.
(4) You must also determine the annual vent flow rate from the mine water stripper/evaporater from monthly information using the same plant instruments or procedures used for accounting purposes (i.e., volumetric flow meter).
[74 FR 56374, Oct. 30, 2009, as amended at 75 FR 66469, Oct. 28, 2010]

Title 40 published on 2014-07-01

The following are only the Rules published in the Federal Register after the published date of Title 40.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

  • 2014-12-11; vol. 79 # 238 - Thursday, December 11, 2014
    1. 79 FR 73750 - Greenhouse Gas Reporting Program: Addition of Global Warming Potentials to the General Provisions and Amendments and Confidentiality Determinations for Fluorinated Gas Production
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Final rule.
      This final rule is effective on January 1, 2015.
      40 CFR Part 98

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code

Title 40 published on 2014-07-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 40 CFR 98 after this date.

  • 2014-12-11; vol. 79 # 238 - Thursday, December 11, 2014
    1. 79 FR 73750 - Greenhouse Gas Reporting Program: Addition of Global Warming Potentials to the General Provisions and Amendments and Confidentiality Determinations for Fluorinated Gas Production
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Final rule.
      This final rule is effective on January 1, 2015.
      40 CFR Part 98