40 CFR Part 53, Subpart E, Figure E-2 to Subpart E of Part 53 - Product Manufacturing Checklist

View PDF at GPO Pt. 53, Subpt. E, Fig. E-2
Figure E-2 to Subpart E of Part 53—Product Manufacturing Checklist
PRODUCT MANUFACTURING CHECKLIST
______________________________
AuditeeAuditor signatureDate
Compliance Status:Y = YesN = NoNA = Not applicable/Not available Verification Comments (Includes documentation of who, what, where, when, why) (Doc. #, Rev. #, Rev. Date)
Verification Verified by Direct Observation of Process or of Documented Evidence: Performance, Design or Application Spec. Corresponding to Sections of 40 CFR Part 53 or 40 CFR Part 50, Appendix L
Y N NA
Performance Specification Tests
Assembled operational performance (Burn-in test) (§ 53.53)
Sample flow rate (§ 53.53) (L-7.4.1, L-7.4.2)
Sample flow rate regulation (§ 53.53) (L-7.4.3)
Flow rate and average flow rate measurement accuracy (§ 53.53) (L-7.4.5)
Ambient air temperature measurement accuracy (§ 53.55) (L-7.4.8)
Ambient barometric pressure measurement accuracy (§ 53.56) (L-7.4.9)
Sample flow rate cut-off (§ 53.53) (L-7.4.4)
Sampler leak check facility (§ 53.52) (L-7.4.6)
Application Specification Tests
Flow rate calibration transfer standard (L-9.2)
Operational /Instructional manual (L-7.4.18)
Design Specification Tests
Impactor (jet width) (§ 53.51(d)(1)) (L-7.3.4.1)
Surface finish (§ 53.51(d)(2)) (L-7.3.7)

Title 40 published on 2014-07-01

no entries appear in the Federal Register after this date.

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code
U.S. Code: Title 42 - THE PUBLIC HEALTH AND WELFARE
Statutes at Large
Public Laws

91-604