40 CFR Part 63, Subpart DDDDD, Table 5 to Subpart DDDDD of Part 63 - Performance Testing Requirements

Status message

There are 6 Updates appearing in the Federal Register for 40 CFR 63. View below or at eCFR (GPOAccess)
View PDF at GPO Pt. 63, Subpt. DDDDD, Table 5
Table 5 to Subpart DDDDD of Part 63—Performance Testing Requirements
As stated in § 63.7520 , you must comply with the following requirements for performance test for existing, new or reconstructed affected sources:
To conduct a performance test for the following pollutant . . . You must . . . Using . . .
1. Particulate Matter a. Select sampling ports location and the number of traverse points Method 1 in appendix A to part 60 of this chapter.
b. Determine velocity and volumetric flow-rate of the stack gas Method 2, 2F, or 2G in appendix A to part 60 of this chapter.
c. Determine oxygen and carbon dioxide concentrations of the stack gas Method 3A or 3B in appendix A to part 60 of this chapter, or ASME PTC 19, Part 10 (1981) (IBR, see § 63.14(i)).
d. Measure the moisture content of the stack gas Method 4 in appendix A to part 60 of this chapter.
e. Measure the particulate matter emission concentration Method 5 or 17 (positive pressure fabric filters must use Method 5D) in appendix A to part 60 of this chapter.
f. Convert emissions concentration to lb per MMBtu emission rates Method 19 F-factor methodology in appendix A to part 60 of this chapter.
2. Total selected metals a. Select sampling ports location and the number of traverse points Method 1 in appendix A to part 60 of this chapter.
b. Determine velocity and volumetric flow-rate of the stack gas Method 2, 2F, or 2G in appendix A to part 60 of this chapter.
c. Determine oxygen and carbon dioxide concentrations of the stack gas Method 3A or 3B in appendix A to part 60 of this chapter, or ASME PTC 19, Part 10 (1981) (IBR, see § 63.14(i)).
d. Measure the moisture content of the stack gas Method 4 in appendix A to part 60 of this chapter.
e. Measure the total selected metals emission concentration Method 29 in appendix A to part 60 of this chapter.
f. Convert emissions concentration to lb per MMBtu emission rates Method 19 F-factor methodology in appendix A to part 60 of this chapter.
3. Hydrogen chloride a. Select sampling ports location and the number of traverse points Method 1 in appendix A to part 60 of this chapter.
b. Determine velocity and volumetric flow-rate of the stack gas Method 2, 2F, or 2G in appendix A to part 60 of this chapter.
c. Determine oxygen and carbon dioxide concentrations of the stack gas Method 3A or 3B in appendix A to part 60 of this chapter, or ASME PTC 19, Part 10 (1981) (IBR, see § 63.14(i)).
d. Measure the moisture content of the stack gas Method 4 in appendix A to part 60 of this chapter.
e. Measure the hydrogen chloride emission concentration Method 26 or 26A in appendix A to part 60 of this chapter.
f. Convert emissions concentration to lb per MMBtu emission rates Method 19 F-factor methodology in appendix A to part 60 of this chapter.
4. Mercury a. Select sampling ports location and the number of traverse points Method 1 in appendix A to part 60 of this chapter.
b. Determine velocity and volumetric flow-rate of the stack gas Method 2, 2F, or 2G in appendix A to part 60 of this chapter.
c. Determine oxygen and carbon dioxide concentrations of the stack gas Method 3A or 3B in appendix A to part 60 of this chapter, or ASME PTC 19, Part 10 (1981) (IBR, see § 62.14(i)).
d. Measure the moisture content of the stack gas Method 4 in appendix A to part 60 of this chapter.
e. Measure the mercury emission concentration Method 29 in appendix A to part 60 of this chapter or Method 101A in appendix B to part 61 of this chapter or ASTM Method D6784-02 (IBR, see § 63.14(b)).
f. Convert emissions concentration to lb per MMBtu emission rates Method 19 F-factor methodology in appendix A to part 60 of this chapter.
5. Carbon Monoxide a. Select the sampling ports location and the number of traverse points Method 1 in appendix A to part 60 of this chapter.
b. Determine oxygen and carbon dioxide concentrations of the stack gas Method 3A or 3B in appendix A to part 60 of this chapter, or ASTM D6522-00 (IBR, see § 63.14(b)), or ASME PTC 19, Part 10 (1981) (IBR, see § 63.14(i)).
c. Measure the moisture content of the stack gas Method 4 in appendix A to part 60 of this chapter.
d. Measure the carbon monoxide emission concentration Method 10, 10A, or 10B in appendix A to part 60 of this chapter, or ASTM D6522-00 (IBR, see § 63.14(b)) when the fuel is natural gas.

Title 40 published on 2013-07-01

The following are only the Rules published in the Federal Register after the published date of Title 40.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

  • 2014-03-27; vol. 79 # 59 - Thursday, March 27, 2014
    1. 79 FR 17340 - National Emission Standards for Hazardous Air Pollutant Emissions: Group IV Polymers and Resins; Pesticide Active Ingredient Production; and Polyether Polyols Production
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Final rule.
      This final action is effective on March 27, 2014. The incorporation by reference of certain publications listed in this final rule was approved by the Director of the Federal Register as of March 27, 2014.
      40 CFR Part 63

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code

Title 40 published on 2013-07-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 40 CFR 63 after this date.

  • 2014-03-27; vol. 79 # 59 - Thursday, March 27, 2014
    1. 79 FR 17340 - National Emission Standards for Hazardous Air Pollutant Emissions: Group IV Polymers and Resins; Pesticide Active Ingredient Production; and Polyether Polyols Production
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Final rule.
      This final action is effective on March 27, 2014. The incorporation by reference of certain publications listed in this final rule was approved by the Director of the Federal Register as of March 27, 2014.
      40 CFR Part 63