40 CFR Part 63, Subpart DDDDDD, Table 2 to Subpart DDDDDD of Part 63 - Emission Limits and Standards for New Affected Sources

Status message

There are 6 Updates appearing in the Federal Register for 40 CFR 63. View below or at eCFR (GPOAccess)
prev | next
View PDF at GPO Pt. 63, Subpt. DDDDDD, Table 2
Table 2 to Subpart DDDDDD of Part 63—Emission Limits and Standards for New Affected Sources
For this type of emission point . . . And for this air pollutant . . . And for an affected source producing this type of PVC resin . . . You must meet this emissionlimit . . .
a Emission limits at 3 percent oxygen, dry basis.
b Affected sources have the option to comply with either the total hydrocarbon limit or the total organic HAP limit.
PVC-only process vents a Vinyl chloride All resin types 5.3 parts per million by volume (ppmv).
Total hydrocarbons All resin types 46 ppmv measured as propane
Total organic HAP b All resin types 140 ppmv.
Dioxins/furans (toxic equivalency basis) All resin types 0.13 nanograms per dry standard cubic meter (ng/dscm).
PVC-combined process vents a Vinyl chloride All resin types 0.56 ppmv.
Total hydrocarbons All resin types 2.3 ppmv measured as propane
Total organic HAP b All resin types 29 ppmv
Dioxins/furans (toxic equivalency basis) All resin types 0.076 ng/dscm.
Stripped resin Vinyl chloride Bulk resin 7.1 parts per million by weight (ppmw).
Dispersion resin 1,500 ppmw.
Suspension resin 36 ppmw.
Suspension blending resin 140 ppmw.
Copolymer resin 790 ppmw.
Total non-vinyl chloride organic HAP Bulk resin 170 ppmw.
Dispersion resin 320 ppmw.
Suspension resin 36 ppmw.
Suspension blending resin 500 ppmw.
Copolymer resin 1,900 ppmw.
Process Wastewater Vinyl chloride All resin types 2.1 ppmw.
Total non-vinyl chloride organic HAP All resin types 0.018 ppmw.
[77 FR 22906, Apr. 17, 2012]

Title 40 published on 2013-07-01

The following are only the Rules published in the Federal Register after the published date of Title 40.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

  • 2014-03-27; vol. 79 # 59 - Thursday, March 27, 2014
    1. 79 FR 17340 - National Emission Standards for Hazardous Air Pollutant Emissions: Group IV Polymers and Resins; Pesticide Active Ingredient Production; and Polyether Polyols Production
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Final rule.
      This final action is effective on March 27, 2014. The incorporation by reference of certain publications listed in this final rule was approved by the Director of the Federal Register as of March 27, 2014.
      40 CFR Part 63

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code

Title 40 published on 2013-07-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 40 CFR 63 after this date.

  • 2014-07-02; vol. 79 # 127 - Wednesday, July 2, 2014
    1. 79 FR 37850 - National Emission Standards for Hazardous Air Pollutants: Off-Site Waste and Recovery Operations
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Proposed rule.
      Comments. Comments must be received on or before August 18, 2014. A copy of comments on the information collection provisions should be submitted to the Office of Management and Budget (OMB) on or before August 1, 2014. Public Hearing. We do not plan to conduct a public hearing unless requested. If requested, we will hold a public hearing on July 17, 2014. To request a hearing, please contact the person listed in the following FOR FURTHER INFORMATION CONTACT section by July 14, 2014.
      40 CFR Part 63