40 CFR Part 63, Subpart G, Figure 1 to Subpart G of Part 63 - Definitions of Terms Used in Wastewater Equations

Status message

There are 6 Updates appearing in the Federal Register for 40 CFR 63. View below or at eCFR (GPOAccess)
prev | next
View PDF at GPO Pt. 63, Subpt. G, Fig. 1
Figure 1 to Subpart G of Part 63—Definitions of Terms Used in Wastewater Equations
Main Terms
AMR=Actual mass removal of Table 8 and/or Table 9 compounds achieved by treatment process or a series of treatment processes, kg/hr.
C=Concentration of Table 8 and/or Table 9 compounds in wastewater, ppmw.
CG=Concentration of TOC (minus methane and ethane) or total organic hazardous air pollutants, in vented gas stream, dry basis, ppmv.
CGc=Concentration of TOC or organic hazardous air pollutants corrected to 3-percent oxygen, in vented gas stream, dry basis, ppmv.
CGS=Concentration of sample compounds in vented gas stream, dry basis, ppmv.
E=Removal or destruction efficiency, percent.
Fbio=Site-specific fraction of Table 8 and/or Table 9 compounds biodegraded, unitless.
fbio=Site-specific fraction of an individual Table 8 or Table 9 compound biodegraded, unitless.
Fm=Compound-specific fraction measured factor, unitless (listed in table 34).
Fr=Fraction removal value for Table 8 and/or Table 9 compounds, unitless (listed in Table 9).
Fravg=Flow-weighted average of the Fr values.
i=Identifier for a compound.
j=Identifier for a sample.
k=Identifier for a run.
K2=Constant, 41.57 * 10−9, (ppm)−1 (gram-mole per standard m3) (kg/g), where standard temperature (gram-mole per standard m3) is 20 °C.
m=Number of samples.
M=Mass, kg.
MW=Molecular weight, kg/kg-mole.
n=Number of compounds.
p=Number of runs.
%O2d=Concentration of oxygen, dry basis, percent by volume.
Q=Volumetric flowrate of wastewater, m3/hr.
QG=Volumetric flow rate of vented gas stream, dry standard, m3/min.
QMG=Mass flowrate of TOC (minus methane and ethane) or organic hazardous air pollutants, in vented gas stream, kg/hr.
QMW=Mass flowrate of Table 8 and/or Table 9 compounds in wastewater, kg/hr.
ρ=Density, kg/m3.
RMR=Required mass removal achieved by treatment process or a series of treatment processes, kg/hr.
tT=Total time of all runs, hr.
Subscripts
a=Entering.
b=Exiting.
i=Identifier for a compound.
j=Identifier for a sample.
k=Identifier for a run.
m=Number of samples.
n=Number of compounds.
p=Number of runs.
T=Total; sum of individual.
[59 FR 19468, Apr. 22, 1994, as amended at 59 FR 29201, June 6, 1994; 61 FR 63629-63630, Dec. 12, 1995; 62 FR 2779, Jan. 17, 1997; 63 FR 67793, Dec. 9, 1998; 64 FR 20195, Apr. 26, 1999; 65 FR 78284, Dec. 14, 2000; 66 FR 6935, Jan. 22, 2001]

Title 40 published on 2013-07-01

The following are only the Rules published in the Federal Register after the published date of Title 40.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

  • 2014-03-27; vol. 79 # 59 - Thursday, March 27, 2014
    1. 79 FR 17340 - National Emission Standards for Hazardous Air Pollutant Emissions: Group IV Polymers and Resins; Pesticide Active Ingredient Production; and Polyether Polyols Production
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Final rule.
      This final action is effective on March 27, 2014. The incorporation by reference of certain publications listed in this final rule was approved by the Director of the Federal Register as of March 27, 2014.
      40 CFR Part 63

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code

Title 40 published on 2013-07-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 40 CFR 63 after this date.

  • 2014-03-27; vol. 79 # 59 - Thursday, March 27, 2014
    1. 79 FR 17340 - National Emission Standards for Hazardous Air Pollutant Emissions: Group IV Polymers and Resins; Pesticide Active Ingredient Production; and Polyether Polyols Production
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Final rule.
      This final action is effective on March 27, 2014. The incorporation by reference of certain publications listed in this final rule was approved by the Director of the Federal Register as of March 27, 2014.
      40 CFR Part 63