40 CFR Part 63, Subpart G, Table 30 to Subpart G of Part 63 - Roof Fitting Loss Factors, KFa, KFb, and m, a and Typical Number of Fittings, NT

Status message

There are 7 Updates appearing in the Federal Register for 40 CFR 63. View below or at eCFR (GPOAccess)
View PDF at GPO Pt. 63, Subpt. G, Table 30
Table 30 to Subpart G of Part 63—Roof Fitting Loss Factors, KFa, KFb, and m, a and Typical Number of Fittings, NT
Fitting type and construction details Loss factors b Typical number of fittings, NT
KFa (lb-mole/yr) KFb (lb-mole/[mi/hr]m-yr) m (dimensionless)
a The roof fitting loss factors, KFa, KFb, and m, may only be used for wind speeds from 2 to 15 miles per hour.
b Unit abbreviations are as follows: lb = pound; mi = miles; hr = hour; yr = year.
c If no specific information is available, this value can be assumed to represent the most common or typical roof fittings currently in use.
d A slotted guide-pole/sample well is an optional fitting and is not typically used.
e Roof drains that drain excess rainwater into the product are not used on pontoon floating roofs. They are, however, used on double-deck floating roofs and are typically left open.
f The most common roof leg diameter is 3 inches. The loss factors for 21/2-inch diameter roof legs are provided for use if this smaller size roof is used on a particular floating roof.
g Rim vents are used only with mechanical-shoe primary seals.
Access hatch (24-in-diameter well) 1.
Bolted cover, gasketed 0 0 c 0
Unbolted cover, ungasketed 2.7 7.1 1.0
Unbolted cover, gasketed 2.9 0.41 1.0
Unslotted guide-pole well (8-in-diameter unslotted pole, 21-in-diameter well) 1.
Ungasketed sliding cover 0 67 c 0.98
Gasketed sliding cover 0 3.0 1.4
Slotted guide-pole/sample well (8-in-diameter unslotted pole, 21-in-diameter well) (d).
Ungasketed sliding cover, without float 0 310 1.2
Ungasketed sliding cover, with float 0 29 2.0
Gasketed sliding cover, without float 0 260 1.2
Gasketed sliding cover, with float 0 8.5 1.4
Gauge-float well (20-inch diameter) 1.
Unbolted cover, ungasketed 2.3 5.9 c 1.0
Unbolted cover, gasketed 2.4 0.34 1.0
Bolted cover, gasketed 0 0 0
Gauge-hatch/sample well (8-inch diameter) 1.
Weighted mechanical actuation, gasketed 0.95 0.14 c 1.0
Weighted mechanical actuation, ungasketed 0.91 2.4 1.0
Vacuum breaker (10-in-diameter well) NF6 (Table 31).
Weighted mechanical actuation, gasketed 1.2 0.17 c 1.0
Weighted mechanical actuation, ungasketed 1.2 3.0 1.0
Roof drain (3-in-diameter) NF7 (Table 31).
Open 0 7.0 e 1.4 NF8 (Table 32 f).
90 percent closed 0.51 0.81 1.0
Roof leg (3-in-diameter) NF8 (Table 32 f).
Adjustable, pontoon area 1.5 0.20 c 1.0
Adjustable, center area 0.25 0.067 c 1.0
Adjustable, double-deck roofs 0.25 0.067 1.0
Fixed 0 0 0
Roof leg (21/2-in-diameter) NF8 (Table 32 f).
Adjustable, pontoon area 1.7 0 0
Adjustable, center area 0.41 0 0
Adjustable, double-deck roofs 0.41 0 0
Fixed 0 0 0
Rim vent (6-in-diameter) 1 g.
Weighted mechanical actuation, gasketed 0.71 0.10 c 1.0
Weighted mechanical actuation, ungasketed 0.68 1.8 1.0

Title 40 published on 2014-07-01

The following are only the Rules published in the Federal Register after the published date of Title 40.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

  • 2014-11-25; vol. 79 # 227 - Tuesday, November 25, 2014
    1. 79 FR 70102 - National Emission Standards for Hazardous Air Pollutants; Delegation of Authority to Texas
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Direct final rule; delegation of authority.
      This rule is effective on January 26, 2015 without further notice, unless EPA receives relevant adverse comment by December 26, 2014. If EPA receives such comment, EPA will publish a timely withdrawal in the Federal Register informing the public that this rule will not take effect.
      40 CFR Part 63

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code

Title 40 published on 2014-07-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 40 CFR 63 after this date.

  • 2014-12-12; vol. 79 # 239 - Friday, December 12, 2014
    1. 79 FR 73872 - Phosphoric Acid Manufacturing and Phosphate Fertilizer Production RTR and Standards of Performance for Phosphate Processing; Extension of Comment Period
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Notice of proposed rulemaking; extension of public comment period.
      Comments. The public comment period for the proposed rule published in the Federal Register on November 7, 2014, (79 FR 66512) is being extended for 30 days to January 21, 2015.
      40 CFR Parts 60 and 63