40 CFR Part 63, Subpart HHHH, Table 1 to Subpart HHHH of Part 63 - Minimum Requirements for Monitoring and Recordkeeping

Status message

There are 5 Updates appearing in the Federal Register for 40 CFR 63. View below or at eCFR (GPOAccess)
prev | next
View PDF at GPO Pt. 63, Subpt. HHHH, Table 1
Table 1 to Subpart HHHH of Part 63—Minimum Requirements for Monitoring and Recordkeeping
As stated in § 63.2998(c), you must comply with the minimum requirements for monitoring and recordkeeping in the following table:
You must monitor these parameters: At this frequency: And record for the monitored perameter:
a Required if a thermal oxidizer is used to control formaldehyde emissions.
b Required if process modifications or a control device other than a thermal oxidizer is used to control emissions.
c These parameters must be monitored and values recorded, but no operating limits apply.
1. Thermal oxidizer temperature a Continuously 15-minute and 3-hour block averages.
2. Other process or control device parameters specified in your OMM b plan. As specified in your OMM plan As specified in your OMM plan.
3. Urea-formaldehyde resin solids application rate. On each operating day, calculate the average lb/hr application rate for each product manufactured during that day. The average lb/hr value for each product manufactured during the day.
4. Resin free-formaldehyde content For each lot of resin purchased The value for each lot used during the operating day.
5. Loss-on-ignition c Measured at least once per day, for each product manufactured during that day The value for each product manufactured during the operating day.
6. UF-to-latex ratio in the binder c For each batch of binder prepared the operating day. The value for each batch of binder prepared during the operating day.
7. Weight of the final mat product per square (lb/roofing square)c Each product manufactured during the operating day. The value for each product manufactured during the operating day.
8. Average nonwoven wet-formed fiberglass mat production rate (roofing squares per the hour) c For each product manufactured during the operating day. The average value for each product manufactured during operating day.

Title 40 published on 2013-07-01

The following are only the Rules published in the Federal Register after the published date of Title 40.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

  • 2014-02-27; vol. 79 # 39 - Thursday, February 27, 2014
    1. 79 FR 11228 - Revisions to Test Methods and Testing Regulations
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Final rule.
      This final rule is effective on February 27, 2014. The incorporation by reference materials listed in the rule are approved by the Director of the Federal Register as of February 27, 2014.
      40 CFR Parts 51, 60, 61, and 63

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code

Title 40 published on 2013-07-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 40 CFR 63 after this date.

  • 2014-02-27; vol. 79 # 39 - Thursday, February 27, 2014
    1. 79 FR 11228 - Revisions to Test Methods and Testing Regulations
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Final rule.
      This final rule is effective on February 27, 2014. The incorporation by reference materials listed in the rule are approved by the Director of the Federal Register as of February 27, 2014.
      40 CFR Parts 51, 60, 61, and 63