40 CFR Appendix Table 6 to Subpart SSSSS of Part 63 - Table 6 to Subpart SSSSS of Part 63—Initial Compliance With Work Practice Standards

Table 6 to Subpart SSSSS of Part 63—Initial Compliance With Work Practice Standards

As stated in § 63.9806, you must show initial compliance with the work practice standards for affected sources according to the following table:

For each . . . For the following standard . . . You have demonstrated initial compliance if . . .
1. Each affected source listed in Table 3 to this subpart a. Each applicable work practice standard listed in Table 3 to this subpart i. You have selected a method for performing each of the applicable work practice standards listed in Table 3 to this subpart; and
ii. You have included in your Initial Notification a description of the method selected for complying with each applicable work practice standard, as required by § 63.9(b); and
iii. You submit a signed statement with the Notification of Compliance Status that you have implemented the applicable work practice standard listed in Table 3 to this subpart; and
iv. You have described in your OM&M plan the method for complying with each applicable work practice standard specified in Table 3 to this subpart.
2. Each basket or container that is used for holding fired refractory shapes in an existing shape preheater and autoclave during the pitch impregnation process a. Control POM emissions from any affected shape preheater i. You have implemented at least one of the work practice standards listed in item 1 of Table 3 to this subpart; and
ii. You have established a system for recording the date and cleaning method for each time you clean an affected basket or container.
3. Each affected new or existing pitch working tank Control POM emissions You have captured and vented emissions from the affected pitch working tank to the device that is used to control emissions from an affected defumer or coking oven, or to a thermal or catalytic oxidizer that is comparable to the control device used on an affected defumer or coking oven.
4. Each new or existing chromium refractory products kiln Minimize fuel-based HAP emissions You use natural gas, or equivalent, as the kiln fuel.
5. Each existing clay refractory products kiln Minimize fuel-based HAP emissions You use natural gas, or equivalent, as the kiln fuel.
6. Each new or existing curing oven, shape dryer, and kiln that is used to process refractory products that use organic HAP, on and after November 19, 2021 Minimize fuel-based HAP emissions You use natural gas, or equivalent, as the kiln fuel.
[86 FR 66084, Nov. 19, 2021]