46 CFR § 160.055-1 - Incorporation by reference.
(a) Specifications and Standards. This subpart makes reference to the following documents:
(1) Military Specifications:
(2) Federal Specifications:
(3) Federal Standards:
(4) Standards of ASTM:
(5) Coast Guard specification:
(b) Plans. The following plans, of the issue in effect on the date unicellular plastic foam life preservers are manufactured, form a part of this subpart:
(c) Copies on file. Copies of the specifications, standards, and plans referred to in this section shall be kept on file by the manufacturer, together with the approved plans and certificate of approval. The Coast Guard Specification and plans may be obtained upon request from the Commandant (CG–ENG), Attn: Office of Design and Engineering Systems, U.S. Coast Guard Stop 7509, 2703 Martin Luther King Jr. Avenue SE., Washington, DC 20593–7509. The Federal standards may be obtained from the General Services Administration, Federal Acquisition Service, Office of the FAS Commissioner, 2200 Crystal Drive, 11th Floor, Arlington, VA 22202; telephone 703–605–5400. The Military Specifications may be obtained from the Military Specifications and Standards, Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111–5094, https://assist.daps.dla.mil/quicksearch/. The ASTM Standards may be purchased from ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428–2959; telephone 877–909–2786 or Web site http://www.astm.org.