49 CFR 179, Subpart F - Specification for Cryogenic Liquid Tank Car Tanks and Seamless Steel Tanks (Classes DOT-113 and 107A)
- § 179.400 — General specification applicable to cryogenic liquid tank car tanks.
- § 179.400-1 — General.
- § 179.400-3 — Type.
- § 179.400-4 — Insulation system and performance standard.
- § 179.400-5 — Materials.
- § 179.400-6 — Bursting and buckling pressure.
- § 179.400-7 — Tank heads.
- § 179.400-8 — Thickness of plates.
- § 179.400-9 — Stiffening rings.
- § 179.400-10 — Sump or siphon bowl.
- § 179.400-11 — Welding.
- § 179.400-12 — Postweld heat treatment.
- § 179.400-13 — Support system for inner tank.
- § 179.400-14 — Cleaning of inner tank.
- § 179.400-15 — Radioscopy.
- § 179.400-16 — Access to inner tank.
- § 179.400-17 — Inner tank piping.
- § 179.400-18 — Test of inner tank.
- § 179.400-19 — Valves and gages.
- § 179.400-20 — Pressure relief devices.
- § 179.400-21 — Test of pressure relief valves.
- § 179.400-22 — Protective housings.
- § 179.400-23 — Operating instructions.
- § 179.400-24 — Stamping.
- § 179.400-25 — Stenciling.
- § 179.401 — Individual specification requirements applicable to inner tanks for cryogenic liquid tank car tanks.
- § 179.401-1 — Individual specification requirements.
- § 179.500 — Specification DOT-107A * * * * seamless steel tank car tanks.
- § 179.500-1 — Tanks built under these specifications shall meet the requirements of § 179.500.
- § 179.500-3 — Type and general requirements.
- § 179.500-4 — Thickness of wall.
- § 179.500-5 — Material.
- § 179.500-6 — Heat treatment.
- § 179.500-7 — Physical tests.
- § 179.500-8 — Openings in tanks.
- § 179.500-10 — Protective housing.
- § 179.500-11 — Loading and unloading valves.
- § 179.500-12 — Pressure relief devices.
- § 179.500-13 — Fixtures.
- § 179.500-14 — Test of tanks.
- § 179.500-15 — Handling of tanks failing in tests.
- § 179.500-16 — Tests of pressure relief devices.
- § 179.500-17 — Marking.
- § 179.500-18 — Inspection and reports.
Title 49 published on 2012-10-01
The following are only the Rules published in the Federal Register after the published date of Title 49.
For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
Title 49 published on 2012-10-01
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 49 CFR 179 after this date.
GPO FDSys XML | Text type regulations.gov FR Doc. 2012-24263 RIN 2137-AE90 Docket No. PHMSA-2012-0080 (HM-244E) DEPARTMENT OF TRANSPORTATION, Pipeline and Hazardous Materials Safety Administration Final rule. Effective: October 5, 2012. Incorporation by reference date: The incorporation by reference of certain publications listed in this rule was approved by the Director of the Federal Register as of September 11, 2006. 49 CFR Parts 107, 171, 172, 173, 175, 178, and 179 This final rule corrects editorial errors, makes minor regulatory changes and, in response to requests for clarification, improves the clarity of certain provisions in the Hazardous Materials Regulations. The intended effect of this rule is to enhance the accuracy and reduce misunderstandings of the regulations. The amendments contained in this rule are non-substantive changes and do not impose new requirements.