49 CFR Part 192 - TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS
- SUBPART A — General (§§ 192.1 - 192.16)
- SUBPART B — Materials (§§ 192.51 - 192.65)
- SUBPART C — Pipe Design (§§ 192.101 - 192.125)
- SUBPART D — Design of Pipeline Components (§§ 192.141 - 192.203)
- SUBPART E — Welding of Steel in Pipelines (§§ 192.221 - 192.245)
- SUBPART F — Joining of Materials Other Than by Welding (§§ 192.271 - 192.287)
- SUBPART G — General Construction Requirements for Transmission Lines and Mains (§§ 192.301 - 192.328)
- SUBPART H — Customer Meters, Service Regulators, and Service Lines (§§ 192.351 - 192.383)
- SUBPART I — Requirements for Corrosion Control (§§ 192.451 - 192.491)
- SUBPART J — Test Requirements (§§ 192.501 - 192.517)
- SUBPART K — Uprating (§§ 192.551 - 192.557)
- SUBPART L — Operations (§§ 192.601 - 192.631)
- SUBPART M — Maintenance (§§ 192.701 - 192.755)
- SUBPART N — Qualification of Pipeline Personnel (§§ 192.801 - 192.809)
- SUBPART O — Gas Transmission Pipeline Integrity Management (§§ 192.901 - 192.951)
- SUBPART P — Gas Distribution Pipeline Integrity Management (IM) (§§ 192.1001 - 192.1015)
- Appendix A to Part 192 [Reserved]
- Appendix B to Part 192 - Qualification of Pipe
- Appendix C to Part 192 - Qualification of Welders for Low Stress Level Pipe
- Appendix D to Part 192 - Criteria for Cathodic Protection and Determination of Measurements
- Appendix E to Part 192 - Guidance on Determining High Consequence Areas and on Carrying out Requirements in the Integrity Management Rule
Title 49 published on 2012-10-01
no entries appear in the Federal Register after this date.
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
- Appendix A to Part 192 [Reserved]
- Appendix B to Part 192 - Qualification of Pipe
- Appendix C to Part 192 - Qualification of Welders for Low Stress Level Pipe
- Appendix D to Part 192 - Criteria for Cathodic Protection and Determination of Measurements
- Appendix E to Part 192 - Guidance on Determining High Consequence Areas and on Carrying out Requirements in the Integrity Management Rule