49 CFR 229.109 - Safety valves.

Status message

There is 1 rule appearing in the Federal Register for 49 CFR 229. View below or at eCFR (GPOAccess)
§ 229.109 Safety valves.
Every steam generator shall be equipped with at least two safety valves that have a combined capacity to prevent an accumulation of pressure of more than five pounds per square inch above the allowed working pressure. The safety valves shall be independently connected to the separator and located as closely to the separator as possible without discharging inside of the generator compartment. The ends of the safety valve discharge lines shall be located or protected so that discharged steam does not create a hazard.

Title 49 published on 2013-10-01

The following are only the Rules published in the Federal Register after the published date of Title 49.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

  • 2014-04-17; vol. 79 # 74 - Thursday, April 17, 2014
    1. 79 FR 21636 - Locomotive Safety Standards
      GPO FDSys XML | Text
      DEPARTMENT OF TRANSPORTATION, Federal Railroad Administration
      49 CFR Part 229

Title 49 published on 2013-10-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 49 CFR 229 after this date.

  • 2014-04-17; vol. 79 # 74 - Thursday, April 17, 2014
    1. 79 FR 21636 - Locomotive Safety Standards
      GPO FDSys XML | Text
      DEPARTMENT OF TRANSPORTATION, Federal Railroad Administration
      49 CFR Part 229