49 CFR 229.53 - Brake gauges.

Status message

There is 1 rule appearing in the Federal Register for 49 CFR 229. View below or at eCFR (GPOAccess)
§ 229.53 Brake gauges.
All mechanical gauges and all devices providing indication of air pressure electronically that are used by the engineer to aid in the control or braking of the train or locomotive shall be located so that they may be conveniently read from the engineer's usual position during operation of the locomotive. A gauge or device shall not be more than five percent or three pounds per square inch in error, whichever is less.
[66 FR 4192, Jan. 17, 2001]

Title 49 published on 2013-10-01

The following are only the Rules published in the Federal Register after the published date of Title 49.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

  • 2014-04-17; vol. 79 # 74 - Thursday, April 17, 2014
    1. 79 FR 21636 - Locomotive Safety Standards
      GPO FDSys XML | Text
      DEPARTMENT OF TRANSPORTATION, Federal Railroad Administration
      49 CFR Part 229

Title 49 published on 2013-10-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 49 CFR 229 after this date.

  • 2014-04-17; vol. 79 # 74 - Thursday, April 17, 2014
    1. 79 FR 21636 - Locomotive Safety Standards
      GPO FDSys XML | Text
      DEPARTMENT OF TRANSPORTATION, Federal Railroad Administration
      49 CFR Part 229