49 CFR Part 231 - RAILROAD SAFETY APPLIANCE STANDARDS
- § 231.0 — Applicability and penalties.
- § 231.1 — Box and other house cars built or placed in service before October 1, 1966.
- § 231.2 — Hopper cars and high-side gondolas with fixed ends.
- § 231.3 — Drop-end high-side gondola cars.
- § 231.4 — Fixed-end low-side gondola and low-side hopper cars.
- § 231.5 — Drop-end low-side gondola cars.
- § 231.6 — Flat cars.
- § 231.7 — Tank cars with side platforms.
- § 231.8 — Tank cars without side sills and tank cars with short side sills and end platforms.
- § 231.9 — Tank cars without end sills.
- § 231.10 — Caboose cars with platforms.
- § 231.11 — Caboose cars without platforms.
- § 231.12 — Passenger-train cars with wide vestibules.
- § 231.13 — Passenger-train cars with open-end platforms.
- § 231.14 — Passenger-train cars without end platforms.
- § 231.15 — Steam locomotives used in road service.
- § 231.16 — Steam locomotives used in switching service.
- § 231.17 — Specifications common to all steam locomotives.
- § 231.18 — Cars of special construction.
- § 231.19 — Definition of “Right” and “Left.”
- § 231.20 — Variation in size permitted.
- § 231.21 — Tank cars without underframes.
- § 231.22 — Operation of track motor cars.
- § 231.23 — Unidirectional passenger-train cars adaptable to van-type semi-trailer use.
- § 231.24 — Box and other house cars with roofs, 16 feet 10 inches or more above top of rail. 1
- § 231.25 — Track motorcars (self-propelled 4-wheel cars which can be removed from the rails by men).
- § 231.26 — Pushcars.
- § 231.27 — Box and other house cars without roof hatches or placed in service after October 1, 1966.
- § 231.28 — Box and other house cars with roof hatches built or placed in service after October 1, 1966.
- § 231.29 — Road locomotives with corner stairways.
- § 231.30 — Locomotives used in switching service.
- § 231.31 — Drawbars for freight cars; standard height.
- § 231.33 — Procedure for special approval of existing industry safety appliance standards.
- § 231.35 — Procedure for modification of an approved industry safety appliance standard for new railcar construction.
- Appendix A to Part 231 - Schedule of Civil Penalties 1
Authority:
49 U.S.C. 20102-20103, 20107, 20131, 20301-20303, 21301-21302, 21304; 28 U.S.C. 2461, note; and 49 CFR 1.49.
Source:
33 FR 19663, Dec. 25, 1968, unless otherwise noted.
Note:
Where rivets or bolts are required in this part 231 a two-piece steel rivet may be used consisting of:
(a) A solid shank of one-half (1/2) inch minimum diameter steel or material of equal or greater strength having cold forged head on one end, a shank length for material thickness fastened, locking grooves, breakneck groove and pull grooves (all annular grooves) on the opposite end.
(b) A collar of similar material which is cold swaged into the locking grooves forming a head for the opposite end of item (a) after the pull groove section has been removed.
Title 49 published on 2012-10-01
no entries appear in the Federal Register after this date.
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
