Skip to main content
 
CFR › Title 7 › Subtitle B › Chapter VIII › Part 801 › Section 801.5

7 CFR 801.5 - Tolerance for diverter-type mechanical samplers.

§ 801.5
Tolerance for diverter-type mechanical samplers.
The maintenance tolerance for diverter-type mechanical samplers (primary, or primary and secondary in combination) used in performing official inspection services shall be ±10 percent, mean deviation from standard sampling device using corn or the same type of grain that the system will be used to sample.

Title 7 published on 2012-01-01

no entries appear in the Federal Register after this date.

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.

United States Code
USC : Title 7 - AGRICULTURE

§ 71 - Short title

§ 72, 73 - Omitted

§ 74 - Congressional findings and declaration of policy

§ 75 - Definitions

§ 75a - Repealed.

§ 75b - Omitted

§ 76 - Standards and procedures; establishment, amendment, and revocation

§ 77 - Official inspection and weighing requirements; waiver; supervision by representatives of Secretary

§ 78 - Use of official grade designations required; false or misleading grade designations for grain shipped out of the United States

§ 79 - Official inspection

§ 79a - Weighing authority

§ 79b - Testing of equipment

§ 79c - Omitted

§ 79d - Limitation on administrative and supervisory costs

§ 80 to 83 - Omitted

§ 84 - Licensing of inspectors

§ 85 - Suspension, revocation, and refusal to renew licenses; hearing; grounds; temporary suspension

§ 86 - Refusal of inspection and weighing services; civil penalties

§ 87 - Conflicts of interest

§ 87a - Records

§ 87b - Prohibited acts

§ 87c - Criminal penalties

§ 87d - Responsibility for acts of others

§ 87e - General authorities

7 USC § 87e–1 - Repealed.

§ 87f - Enforcement provisions

7 USC § 87f–1 - Registration requirements

7 USC § 87f–2 - Reporting requirements

§ 87g - Relation to State and local laws; separability

§ 87h - Appropriations

§ 87i - Omitted

§ 87j - Advisory committee

§ 87k - Standardizing commercial inspections