7 CFR § 993.602 - Maximum tolerances.

In lieu of the provision prescribed in I C of § 993.97 that the tolerance allowances prescribed therein shall be on a weight basis, the tolerance allowance percentage for each defect or group of defects in I C of § 993.97 shall be derived by dividing the number of prunes in the applicable sample affected with the applicable defect(s) by the total number of prunes in such sample.

[39 FR 30344, Aug. 22, 1974]

Effective Date Note:

At 70 FR 30613, May 27, 2005, § 993.602 was suspended indefinitely.