Source: International Convention on Tonnage Measurement of Ships.
14302(a) requires the Secretary to measure a vessel to which this chapter applies, in the way provided by this chapter and by the Convention. Section
14302(b) provides that a vessel that is required to be measured under this chapter can not also be required to be measured under another law. The exception allows the Panama Canal Commission to continue to use the Canal measurement system for calculation of tolls. Section
14302(c) provides that the applicability of tonnage-based laws that become effective after July 18, 1994, will be based on Convention tonnage measurements. The applicability of tonnage-based laws in effect before July 19, 1994, which are listed by the Secretary, will also be based on Convention tonnage. Therefore, the laws that will be based on regulatory tonnage are those not listed by the Secretary by regulation and those listed in section 14305 of this legislation.
2010—Subsec. (b). Pub. L. 111–281amended subsec. (b) generally. Prior to amendment, subsec. (b) read as follows: “Except as provided in section 1602(a) of the Panama Canal Act of 1979 (22 U.S.C. 3792(a)), a vessel measured under this chapter may not be required to be measured under another law.”
The table below lists the classification updates, since Jan. 3, 2012, for this section. Updates to a broader range of sections may be found at the update page for containing chapter, title, etc.
The most recent Classification Table update that we have noticed was Tuesday, August 13, 2013
An empty table indicates that we see no relevant changes listed in the classification tables. If you suspect that our system may be missing something, please double-check with the Office of the Law Revision Counsel.