10 CFR 429.13 - Testing requirements.

§ 429.13 Testing requirements.

(a) The determination that a basic model complies with an applicable energy conservation standard shall be determined from the values derived pursuant to the applicable testing and sampling requirements set forth in parts 429, 430 and 431. The determination that a basic model complies with the applicable design standard shall be based upon the incorporation of specific design requirements in parts 430 and 431 or as specified in section 325 and 342 of the Act.

(b) Where DOE has determined a particular entity is in noncompliance with an applicable standard or certification requirement, DOE may impose additional testing requirements as a remedial measure.

Title 10 published on 2015-12-04

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 10 CFR Part 429 after this date.

  • 2017-02-02; vol. 82 # 21 - Thursday, February 2, 2017
    1. 82 FR 8985 - Energy Conservation Program: Test Procedures for Compressors
      GPO FDSys XML | Text
      DEPARTMENT OF ENERGY, Office of Energy Efficiency and Renewable Energy
      Final rule; delay of effective date.
      Effective February 1, 2017, the effective date of the rule amending 10 CFR parts 429 and 431 published in the Federal Register at 82 FR 1052 on January 4, 2017, is delayed until March 21, 2017. The incorporation by reference of the publication listed in this rule is approved by the Director of the Federal Register as of March 21, 2017.
      10 CFR Parts 429 and 431


The section you are viewing is cited by the following CFR sections.