14 CFR 21.309 - Location of or change to manufacturing facilities.

§ 21.309 Location of or change to manufacturing facilities.

(a) An applicant may obtain a PMA for manufacturing facilities located outside of the United States if the FAA finds no undue burden in administering the applicable requirements of Title 49 U.S.C. and this subchapter.

(b) The PMA holder must obtain FAA approval before making any changes to the location of any of its manufacturing facilities.

(c) The PMA holder must immediately notify the FAA, in writing, of any change to the manufacturing facilities that may affect the inspection, conformity, or airworthiness of its PMA article.

Title 14 published on 03-May-2017 03:58

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 14 CFR Part 21 after this date.

  • 2017-03-15; vol. 82 # 49 - Wednesday, March 15, 2017
    1. 82 FR 13752 - Airworthiness Criteria: Glider Design Criteria for Stemme AG Model Stemme S12 Powered Glider
      GPO FDSys XML | Text
      DEPARTMENT OF TRANSPORTATION, Federal Aviation Administration
      Airworthiness design criteria.
      These airworthiness design criteria are effective April 14, 2017.
      14 CFR Part 21