Jump to navigation
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
§ 4321 - Congressional declaration of purpose
§ 7572 - Enforcement of standards
§ 106 - Federal Aviation Administration
§ 40113 - Administrative
§ 44701 - General requirements
§ 44702 - Issuance of certificates
§ 44704 - Type certificates, production certificates, airworthiness certificates,,11 So in original. and design and production organization certificates
§ 44714 - Aviation fuel standards
Title 14 published on 09-May-2018 03:57
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 14 CFR Part 34 after this date.
The FAA Aircraft Certification Service (AIR) and Flight Standards Service (AFS) have reorganized to align with functional organization design concepts. The AIR reorganization included eliminating product directorates and restructuring and re-designating field offices. The AFS reorganization included eliminating geographic regions, realigning headquarters organizations, and restructuring field offices. Currently, various rules in the Code of Federal Regulations refer to specific AIR and AFS offices that are obsolete after the reorganizations. This rule replaces specific references with generic references not dependent on any particular office structure. This rule does not impose any new obligations and is only intended to eliminate any confusion about with whom regulated entities and other persons should interact when complying with these various rules in the future.
The FAA is making technical changes to a final rule published in the Federal Register on December 31, 2012. That final rule amended the emission standards for certain turbine engine powered airplanes to incorporate the standards promulgated by the United States Environmental Protection Agency (EPA) on June 18, 2012. The final rule contained six minor technical errors: One in the authority citation, and five in tables listing the emissions standards for engines manufactured on and after July 18, 2012. In addition, we are correcting an error in a definition that existed before the final rule and was overlooked. The FAA is issuing this technical amendment to correct these errors.
On December 31, 2012, the FAA published a final rule with a request for comments amending the emission standards for turbine engine powered airplanes to incorporate the standards that were promulgated by the United States Environmental Protection Agency (EPA) on June 18, 2012. The FAA's final rule fulfilled its requirements under the Clean Air Act Amendments of 1970 to issue regulations ensuring compliance with the EPA standards. Although the public had an opportunity to comment on the EPA's rule, and the FAA adopted the same requirements, the FAA sought public comment on its final rule. This action addresses the comments the FAA received.
This action amends the emission standards for turbine engine powered airplanes to incorporate the standards promulgated by the United States Environmental Protection Agency (EPA) on June 18, 2012. This amendment fulfills the FAA's requirements under the Clean Air Act Amendments of 1970 to issue regulations ensuring compliance with the EPA standards. This action revises the standards for oxides of nitrogen and test procedures for exhaust emissions based on International Civil Aviation Organization standards, and for the identification and marking requirements for engines.