16 CFR Part 1203 - PART 1203—SAFETY STANDARD FOR BICYCLE HELMETS
- Subpart A—The Standard (§§ 1203.1 - 1203.17)
- Subpart B—Certification (§§ 1203.30 - 1203.34)
- Subpart C—Recordkeeping (§§ 1203.40 - 1203.41)
- Subpart D—Requirements For Bicycle Helmets Manufactured From March 17, 1995, Through March 10, 1999 (§§ 1203.51 - 1203.53)
- Figure 1 to Part 1203—Anatomical Planes
- Figure 2 to Part 1203—ISO Headform-Basic, Reference, and Median Planes
- Figure 3 to Part 1203—Location of Reference Plane
- Figure 4 to Part 1203—Location of Test Lines for Helmets Intended for Persons Five (5) Years of Age and Older
- Figure 5 to Part 1203—Location of Test Lines for Helmets Intended for Persons Ages 1 and Older
- Figure 6 to Part 1203—Field of Vision
- Figure 7 to Part 1203—Typical Test Apparatus for Positional Stability Test
- Figure 8 to Part 1203—Apparatus for Test of Retention System Strength
- Figure 9 to Part 1203—Impact Test Apparatus
- Figure 10 to Part 1203—Center of Gravity for Drop Assembly
- Figures 11, 12 and 13 to Part 1203—Hemispherical Anvil and Curbstone Anvil
Authority:
15 U.S.C. 2056, 2058, and 6001–6006. Subpart B is also issued under 15 U.S.C. 2063. Subpart C is also issued under 15 U.S.C. 2065.
Source:
63 FR 11729, Mar. 10, 1998, unless otherwise noted.
The following state regulations pages link to this page.
New Hampshire
Oregon