30 CFR 57.6902 - Excessive temperatures.

Beta! The text on the eCFR tab represents the unofficial eCFR text at ecfr.gov.
§ 57.6902 Excessive temperatures.

(a) Where heat could cause premature detonation, explosive material shall not be loaded into hot areas, such as kilns or sprung holes.

(b) When blasting sulfide ores where hot holes occur that may react with explosive material in blastholes, operators shall -

(1) Measure an appropriate number of blasthole temperatures in order to assess the specific mine conditions prior to the introduction of explosive material;

(2) Limit the time between the completion of loading and the initiation of the blast to no more than 12 hours; and

(3) Take other special precautions to address the specific conditions at the mine to prevent premature detonation.

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.

United States Code

Title 30 published on 2015-07-01

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 30 CFR Part 57 after this date.

  • 2015-09-02; vol. 80 # 170 - Wednesday, September 2, 2015
    1. 80 FR 52984 - MSHA Headquarters, Pittsburgh Safety and Health Technology Center, and Respirable Dust Processing Laboratory Address Changes
      GPO FDSys XML | Text
      DEPARTMENT OF LABOR, Mine Safety and Health Administration
      Final rule; technical amendment.
      Effective Date: September 2, 2015.
      30 CFR Parts 7, 18, 44, 46, 48, 49, 56, 57, 70, 71, 72, 74, 75, and 90