40 CFR § 265.200 - Waste analysis and trial tests.
In addition to performing the waste analysis required by § 265.13, the owner or operator must, whenever a tank system is to be used to treat chemically or to store a hazardous waste that is substantially different from waste previously treated or stored in that tank system; or treat chemically a hazardous waste with a substantially different process than any previously used in that tank system:
(a) Conduct waste analyses and trial treatment or storage tests (e.g., bench-scale or pilot-plant scale tests); or
(b) Obtain written, documented information on similar waste under similar operating conditions to show that the proposed treatment or storage will meet the requirements of § 265.194(a).
Section 265.13 requires the waste analysis plan to include analyses needed to comply with §§ 265.198 and 265.199. Section 265.73 requires the owner or operator to place the results from each waste analysis and trial test, or the documented information, in the operating record of the facility.
The following state regulations pages link to this page.
- N.H. Code Admin. R. Env-Hw 1110.04 - Env-Hw 1110.04 - Requirements for Management of Universal Waste Pesticides
- N.H. Code Admin. R. Env-Hw 508.03 - Env-Hw 508.03 - Small Quantity Generator Extended Quantity and Accumulation
- N.H. Code Admin. R. Env-Hw 509.02 - Env-Hw 509.02 - Full Quantity Generator Accumulation Requirements
- TN Rules and Regs. 0400-12-01-.05 - 0400-12-01-.05 - INTERIM STATUS STANDARDS FOR OWNERS AND OPERATORS OF EXISTING HAZARDOUS WASTE TREATMENT, STORAGE, AND DISPOSAL FACILITIES
- Utah Admin. Code R315-273-13 - R315-273-13 - Standards for Universal Waste Management, Standards for Small Quantity Handlers of Universal Waste -- Waste Management.