Jump to navigation
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). The limitations shall be the same as those specified in § 430.22 of this subpart for the best practicable control technology currently available (BPT).
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
§ 1311 - Effluent limitations
§ 1314 - Information and guidelines
§ 1316 - National standards of performance
§ 1317 - Toxic and pretreatment effluent standards
§ 1318 - Records and reports; inspections
§ 1342 - National pollutant discharge elimination system
§ 1361 - Administration
Title 40 published on 10-May-2017 04:28
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 40 CFR Part 430 after this date.
This rule modifies the testing procedures approved for analysis and sampling under the Clean Water Act. EPA proposed these changes for public comment on September 23, 2010. The changes adopted in this final rule fall into the following categories: New and revised EPA methods and new and revised methods published by voluntary consensus standard bodies (VCSB), such as ASTM International and the Standard Methods Committee; updated versions of currently approved methods; methods reviewed under the alternate test procedures (ATP) program; clarifications to the process for EPA approval for use of alternate procedures for nationwide and Regional use; minimum quality control requirements to improve consistency across method versions; corrections to previously approved methods; and revisions to sample collection, preservation, and holding time requirements. Finally, EPA makes changes to three effluent guideline regulations.