40 CFR 463.34 - New source performance standards.

§ 463.34 New source performance standards.
(a) NSPS for bis(2-ethylhexyl) phthalate, di-n-butyl phthalate, and dimethyl phthalate are reserved.
(b) Any new source subject to this subpart must achieve performance standards (i.e., mass of pollutant discharged), which are calculated by multiplying the average process water usage flow rate for the finishing water processes at a new source times the following pollutant concentrations:
Subpart C
[Finishing water]
Concentration used to calculate NSPS
Pollutant or pollutant property Maximum for any 1 day (mg/l) Maximum for monthly average (mg/l)
1 Within the range of 6.0 to 9.0 at all times.
TSS 130 37
pH (1) (1)
The permit authority will obtain the average process water usage flow rate for the new source finishing water processes from the permittee.

Title 40 published on 2014-07-01

no entries appear in the Federal Register after this date.

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.

United States Code