40 CFR 63.1569 - What are my requirements for HAP emissions from bypass lines?
(a)What work practice standards must I meet? (1) You must meet each work practice standard in Table 36 of this subpart that applies to you. You can choose from the four options in paragraphs (a)(1)(i) through (iv) of this section:
(i) You can elect to install an automated system (Option 1);
(ii) You can elect to use a manual lock system (Option 2);
(iii) You can elect to seal the line (Option 3); or
(iv) You can elect to vent to a control device (Option 4).
(b)How do I demonstrate initial compliance with the work practice standards? You must:
(1) If you elect the option in paragraph (a)(1)(i) of this section, conduct each performance test for a bypass line according to the requirements in § 63.1571 and under the conditions specified in Table 37 of this subpart.
(3) Demonstrate initial compliance with the work practice standard in paragraph (a)(3) of this section by submitting the operation, maintenance, and monitoring plan to your permitting authority as part of your notification of compliance status.
(c)How do I demonstrate continuous compliance with the work practice standards? You must: