40 CFR § 63.5749 - How do I calculate the organic HAP content of aluminum wipedown solvents?

§ 63.5749 How do I calculate the organic HAP content of aluminum wipedown solvents?

(a) Use equation 1 of this section to calculate the weighted-average organic HAP content of aluminum wipedown solvents used in the past 12 months.

HAP WD = j = 1 n ( Vol j ) ( D j ) ( W j ) i = 1 m ( Vol i ) ( Solids i ) (Eq. 1)

Where:
HAPWD = weighted-average organic HAP content of aluminum wipedown solvents, kilograms of HAP per liter of total coating solids from aluminum primers, top coats, and clear coats.
n = number of different wipedown solvents used in the past 12 months.
Volj = volume of aluminum wipedown solvent j used in the past 12 months, liters.
Dj = density of aluminum wipedown solvent j, kilograms per liter.
Wj = mass fraction of organic HAP in aluminum wipedown solvent j.
m = number of different aluminum surface coatings (primers, top coats, and clear coats) used in the past 12 months.
Voli = volume of aluminum primer, top coat, or clear coat i used in the past 12 months, liters.
Solidsi = solids content aluminum primer, top coat, or clear coat i, liter solids per liter of coating.

(b) Compliance is based on a 12-month rolling average. If the weighted-average organic HAP content does not exceed 0.33 kilograms of organic HAP per liter of total coating solids, then you are in compliance with the emission limit specified in § 63.5743(a)(1).