40 CFR Appendix Table 1 to Subpart QQQQ of Part 63, Emission Limits for New or Reconstructed Affected Sources

Table 1 to Subpart QQQQ of Part 63 - Emission Limits for New or Reconstructed Affected Sources

You must comply with the emission limits that apply to your affected source in the following table as required by § 63.4690.

If the affected source applies coating to products in the following subcategory. . . Then, the organic HAP emission limit for the affected source, in grams HAP/liter solids (lb HAP/gal solids) 1 2 is:
1. Exterior siding and primed doorskins 0 (0.00)
2. Flooring 0 (0.00)
3. Interior wall paneling or tileboard 5 (0.04)
4. Other interior panels 0 (0.00)
5. Doors, windows, and miscellaneous 57 (0.48)

1 Determined as a rolling 12-month emission rate according to the requirements in § 63.4741, § 63.4751, or § 63.4761, as applicable.

2 If the affected source applies coatings to products in more than one of the subcategories listed in the table, then you must determine the applicable emission limit according to § 63.4690(c).

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code