40 CFR Appendix Table 2 to Subpart HHHHHHH of Part 63 - Table 2 to Subpart HHHHHHH of Part 63—Emission Limits and Standards for New Affected Sources
Table 2 to Subpart HHHHHHH of Part 63—Emission Limits and Standards for New Affected Sources
For this type of emission
point . . . |
And for this air pollutant . . . | And for an affected source producing this type of PVC
resin . . . |
You must meet this emission
limit . . . |
---|---|---|---|
1. PVC-only process vents a | a. Vinyl chloride | All resin types | 0.56 ppmv. |
b. Total hydrocarbons | All resin types | 7.0 ppmv measured as propane. | |
c. Total organic HAP b | All resin types | 5.5 ppmv. | |
d. Hydrogen chloride | All resin types | 0.17 ppmv. | |
e. Dioxins/furans (toxic equivalency basis) | All resin types | 0.038 ng/dscm. | |
2. PVC-combined process vents a | a. Vinyl chloride | All resin types | 0.56 ppmv. |
b. Total hydrocarbons | All resin types | 2.3 ppmv measured as propane. | |
c. Total organic HAP b | All resin types | 5.5 ppmv. | |
d. Hydrogen chloride | All resin types | 1.4 ppmv. | |
e. Dioxins/furans (toxic equivalency basis) | All resin types | 0.034 nanograms per dry standard cubic meter (ng/dscm). | |
3. Stripped resin | a. Vinyl chloride | i. Bulk resin | 7.1 parts per million by weight (ppmw). |
ii. Dispersion resin | 480 ppmw. | ||
iii. Suspension resin | 7.3 ppmw. | ||
iv. Suspension blending resin | 140 ppmw. | ||
v. Copolymer—all resin types | 790 ppmw. | ||
b. Total non-vinyl chloride organic HAP | i. Bulk resin | 170 ppmw. | |
ii. Dispersion resin | 66 ppmw. | ||
iii. Suspension resin | 15 ppmw. | ||
iv. Suspension blending resin | 500 ppmw. | ||
v. Copolymer resin | 1900 ppmw. | ||
4. Process Wastewater | a. Vinyl chloride | All resin types | 0.28 ppmw. |
b. Total non-vinyl chloride organic HAP | All resin types | 0.018 ppmw. |
a Emission limits at 3 percent oxygen, dry basis.
b Total organic HAP is alternative compliance limit for THC.