40 CFR Appendix Table 2 to Subpart MMMMM of Part 63, Operating Limits for New or Reconstructed Flame Lamination Affected Sources

Table 2 to Subpart MMMMM of Part 63 - Operating Limits for New or Reconstructed Flame Lamination Affected Sources

As stated in § 63.8790(b), you must comply with the operating limits in the following table:

For each . . . You must . . .
1. Scrubber a. Maintain the daily average scrubber inlet liquid flow rate above the minimum value established during the performance test.
b. Maintain the daily average scrubber effluent pH within the operating range value established during the performance test.
c. If you use a venturi scrubber, maintain the daily average pressure drop across the venturi within the operating range value established during the performance test.
2. Other type of control device to which flame lamination emissions are ducted Maintain your operating parameter(s) within the ranges established during the performance test and according to your monitoring plan.

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code